Onkyo SBT-200 User Manual

En-10
Placing the sound bar
Placing the sound bar on the TV rack
TV
VCR DVD player
Note
•
Remove the protective film covering the sound
bar before turning on the system.
•
The front panel of the sound bar is not
removable.
•
Do not change the installation direction when
the sound bar is turned on.
•
Do not stand or sit on the sound bar as you
may be injured.
Using the supplied stand
Use the supplied stand when the TV stand becomes an obstacle to place the sound bar on the TV
rack. This supplied stand allows the sound bar to be placed astride over the TV stand.
1
Affix the supplied double-
faced tapes to 2 positions on
the right and left.
2
Confirm the position of the
tapes, and press the stand to
the tapes so that the tapes
come to the center of each
stand.
•
Stands should be located at the
rear of the sound bar.
3
Place the sound bar on the TV
rack.
Cushion
Bottom of sound
bar
2. Affix the tape
1. Peel off the
transparent tape
from the mount
Align the front line of the sound bar and the
TV stand.

Onkyo SBT-200 Specifications

General

Brand	Onkyo
Model	SBT-200
Category	Speakers
Language	English