Onkyo HTX-22HD - Getting to Know the HTX-22 HD; Front Panel

10
Getting to Know the HTX-22HD
A
Display
See “Display” on page 11.
B
STANDBY indicator
Lights up when the HTX-22HD is on
Standby and flashes while a signal is
being received from the remote controller.
C
ON/STANDBY button
Sets the HTX-22HD to On or Standby.
To operate this button, push it down from
the top.
D
Remote-control sensor
Receives control signals from the remote
controller.
E
MASTER VOLUME control
Sets the volume of the HTX-22HD.
F
INPUT button
Selects the input source.
G
LISTENING MODE button
Selects the listening modes.
Front Panel
14
5
6
7
2
3
HTX-22HDEn.book Page 10 Monday, April 7, 2008 2:03 PM