Onkyo HTX-22HD - Page 62

62
Advanced Setup —Continued
Equalizer Settings
With the Equalizer settings, you can adjust
the tone of each speaker.
1
Press the [SETUP] button.
2
Use the Up and Down [ ]/[ ]
buttons to select “2. Speaker
Setup,” and then press
[ENTER].
3
Use the Up and Down [ ]/[ ]
buttons to select “Equalizer,”
and then press [ENTER].
ENTER
SETUP
These settings are set automatically by
the Automatic Speaker Setup function
(see page 32).
4
Use the Left and Right [ ]/[ ]
buttons to select:
Off: Tone off, response flat.
Audyssey: The tone for each
speaker is set automatically
by the Automatic Speaker
Setup function. Be sure to
select this setting after hav-
ing performed the Automatic
Speaker Setup. This option
is available only if the Auto-
matic Speaker Setup func-
tion has been run.
Manual: You can adjust the
equalizer for each speaker
manually.
If you selected Manual, continue
with this procedure. If you
selected Off or Audyssey, pro-
ceed to step 8.
5
Press the Down [ ] button,
and then use the Left and Right
[ ]/[ ] buttons to select a
speaker.
You can adjust the EQ for the
following speakers:
Front: Front left and right
speakers.
Center: Center speaker.
Surround: Surround left and
right speakers.
SurrBack: Surround back left
and right speakers.
Subwoofer: This subwoofer.
Speakers that you set to No or
None in the “Speaker Configura-
tion” on page 56 cannot be
selected.
HTX-22HDEn.book Page 62 Monday, April 7, 2008 2:03 PM