73
Troubleshooting
—Continued
The HTX-22HD contains a microcomputer for sig-
nal processing and control functions. In very rare
situations, severe interference, noise from an
external source, or static electricity may cause it to
lockup. In the unlikely event that this happens,
unplug the power cord from the wall outlet, wait at
least 5 seconds, and then plug it back in again.
Onkyo is not responsible for damages (such as CD
rental fees) due to unsuccessful recordings caused
by this unit’s malfunction. Before you record impor-
tant data, make sure that the material will be
recorded correctly.
Before disconnecting the power cord from the wall
outlet, set the HTX-22HD to Standby.
HTX-22HDEn.book Page 73 Monday, April 7, 2008 2:03 PM
To Next Page
Loading...
