Onkyo LS-T10 - Bluetooth Connection

16
Playing via Bluetooth Connection
Within 33 ft (10m)
1
2
Steps 3 and 4 need to be performed
on the Bluetooth device.
1. Turn the unit on.
2. Press
.

The indicator flashes faster, and
the pairing starts.

The pairing will end in about 30 seconds
and the indicator starts flashing slowly.
3. On the Bluetooth device, select
the unit (Onkyo LS-T10) to
make a connection.

For details on operation, see the instruction
manual of the Bluetooth device.

If the operation does not start as
normal within the 33 feet (10 m)
range, get the Bluetooth device closer
to the unit and retry the operation.

If a passcode (password, passkey or
PIN code) is requested, enter "0000".

When the pairing is completed, the
indicator lights.
4. Start playback.

If you reset Bluetooth of this unit or removed the registration of this unit from the
Bluetooth device, perform pairing (see above) again.

To connect any other Bluetooth device, press and hold the button of the main
unit to start pairing.