Onkyo LS3100 User Manual

20
En
Tip
• If you press and hold the /TV input button on the
top panel or INPUT on the remote controller for
three seconds with Bluetooth selector selected, the
Bluetooth connection to the Bluetooth-enabled
device is interrupted and start the pairing.
Note
• If there is no sound output even after the paring is
done successfully, consult the user manual of the
Bluetooth-enabled device, and then select the
“Onkyo LS3100” as the audio output device.
• The controller can store the pairing information of
up to 8 Bluetooth devices. If the pairing is done for
the ninth Bluetooth device, the pairing information
of device connected via Bluetooth in the most past
times is erased.
• For some Bluetooth-enabled devices, a pairing is
necessary for every reconnection.
• The multiple Bluetooth devices cannot be
connected at the same time.

Onkyo LS3100 Specifications

General

Product color	Black
RMS rated power	- W
Recommended usage	Home theatre
Remotely operated	Yes
Audio output channels	2.1 channels
Amplifier frequency range	50 - 20000 Hz
Signal-to-Noise Ratio (SNR)	93 dB
Total Harmonic Distortion (THD)	0.8 %
Amplifier dimensions (W x D x H)	187 x 120 x 32 mm
Satellite speaker type	2-way
Satellite speaker weight	700 g
Number of satellite speakers	2
Satellite speakers RMS power	40 W
Satellite speaker frequency range	200 - 20000 Hz
Satellite speaker dimensions (WxDxH)	169 x 108 x 78 mm
Subwoofer type	Active subwoofer
Subwoofer weight	5800 g
Subwoofer frequency range	40 - 200000 Hz
Subwoofer drivers quantity	1
Subwoofer dimensions (WxDxH)	261 x 269 x 337 mm
Subwoofer driver diameter (imperial)	6.3 \
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Bluetooth version	2.1+EDR

Weight and Dimensions

Set weight	10500 g