button to
enter them.
To change the type of characters entered...
Go back to step 4 and change the
character input mode. Then, select and
enter characters using the AMCS knob.
To correct the character entered...
Move to the character you want to
correct using the
π
and
π
buttons
(the character blinks), and then reenter
the character you want.
To insert a character...
Move to the point at which you want to
insert a character using the
π
and
π
buttons (the insertion point
blinks).
Then turn the AMCS knob counter-
clockwise (
blinks) and press the
AMCS Knob (the cursor blinks).
Finally, enter the character you want.
To erase a character...
Move to the character which you want
to erase using the
π
and
π
buttons
(the character blinks) and then press the
EDIT/NO button or CLEAR button on
the remote controller (RC-339MD).
To make one space...
Turn AMCS knob to display (
) and
press the knob to set.
6. Press the YES button.
"Complete" appears in the display.
Or, with the remote control, press the
NAME button.
Note:
While the TOC indicator is lit or flashing,
do not move or unplug the MD recorder.
Erasing the disc name and all
track names at one time
1. Press the
ßß
ßß
ß
button.
2. Press the EDIT/NO button to display
"Name Erase?".
Press the EDIT/NO button several
times until "Name Erase?" appears in
the display.
Note:
Once the disc name and all track names
are erased, they cannot be restored.
3. Press the YES button.
All track names and the disc name are
erased.
2
1
3
DISC
12345
678910
11 12 13 14 15
DIGITAL IN
010 22040
R
6
L
15
1
EDIT/NO
12345
678910
11 12 13 14 15
DIGITAL IN
TOC
010 22040
R
6
L
15
1
YES
Lights when completed.
NAME
Remote control
12345
678910
11 12 13 14 15
DIGITAL IN
TOC
010 22040
R
6
L
15
1
YES
Lights when completed.
To Next Page
Loading...
Need help?
General
