Onkyo NCP-302 Wi-Fi Set-Up Guide

Onkyo NCP-302 Wi-Fi Set-up Guide:
Hello! Thank you for purchasing the Onkyo NCP-302 speaker. This quick setup guide will help you
set-up your NCP-302 to your Wi-Fi network.
Step 1: Connect the phone/tablet to the same wireless network that the Onkyo NCP-302 will be
operated on.
Step 2: Download and open the “Onkyo Controller” application for your iOS or Android operating
system. If you have an Android device, this can be downloaded on Google Play. If you have an Apple
device, this can be downloaded via the AppStore.
Step 3: Once the “Onkyo Controller” application is open, tap the in-application menu button positioned
in the upper-left side of the application. (Shown below).

Onkyo NCP-302 Specifications

General

Product color	Black
Volume control	Rotary
Recommended usage	Universal
Multi-Room Streaming (MRS) support	Yes
Speaker type	2-way
Woofer diameter	77 mm
Tweeter diameter	26 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	- channels
RMS rated power	- W
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.5 %
Package depth	206 mm
Package width	426 mm
Package height	262 mm
Package volume	3800 cm³
Connectivity technology	Wired & Wireless
Cables included	AC, AUX
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	10 W

Weight and Dimensions

Depth	106 mm
Width	320 mm
Height	172 mm
Weight	2600 g