16
Remote Controller—Continued
■ Controlling the tuner
To control the AV controller’s tuner, press the [TUNER]
(or [RECEIVER]) button.
You can select AM or FM by pressing the [TUNER] but-
ton repeatedly.
1 Arrow [q]/[w] buttons
Used to tune into radio stations.
2 D.TUN button (67)
(TUNER remote mode only)
Selects the Direct tuning mode.
3 DISPLAY button
Displays information about the band, frequency,
preset number, and so on.
4 CH +/– button (68)
Used to select radio presets.
5 Number buttons (67, 68)
Used to select radio stations directly in the Direct
tuning mode. Also you can select a preset directly.
Note:
An Onkyo cassette recorder connected via u can also
be controlled in Receiver mode (see page 143).
To Next Page
Loading...
Need help?
General
