To Next PageTo Next Page
Need help?Do you have a question about the Onkyo SL-107 and is the answer not in the manual?
Information on the legality of recording copyrighted material for personal use only.
Details that the AC fuse is non-user-serviceable and requires qualified service personnel.
Cleaning guidelines using a soft cloth and mild detergent; avoid abrasive materials.
Warning to verify AC outlet voltage matches the unit's requirement before plugging in.
Advice on avoiding direct sunlight, humidity, heat sources, and liquids to prevent damage.
Explanation that product name suffixes indicate color, with no impact on specifications or operation.
Warning against specific abnormal audio signals that can cause damage; advises reducing output level.
Status indicator showing operational mode (green) or standby mode (red).
Adjusts the high-frequency cutoff for the subwoofer between 50 Hz and 200 Hz.
Reverses subwoofer phase (NOR/REV) to achieve better bass sound based on setup.
Adjusts the subwoofer's sound output volume level.
Turns the unit's power supply ON or OFF.
Connects to amplifier or receiver speaker outputs using speaker cables.
Outputs speaker-level signals to the front speakers.
Connects to the LINE OUT jacks of an amplifier or other audio equipment.
Connecting to an AV amplifier's SUBWOOFER PREOUT jack using a pin connector cable for optimal bass.
Procedure for connecting to the SUBWOOFER PREOUT jack of an amplifier or receiver.
Connecting to amplifiers without a SUBWOOFER PREOUT jack via the unit's LINE INPUT jacks.
Connecting the SL-107 SPEAKER LEVEL INPUT terminals to an amplifier's speaker outputs.
Instructions for preparing and inserting speaker cables into the terminals securely.
Guide to adjusting crossover frequency and output level for balanced sound reproduction.
General
