Onkyo T-488F - Page 13

How to enter characters
Ea a
™@ Entering characters
Characters
can
be
entered
during
reception
of
an
AM
or
FM
broadcast
station,
however,
this
is
not
possible
during
reception
of
an
RDS
station.
This
function
enables
you
to
memorize
a
maximum
of
8
characters
consisting
of
alphabetics,
some
symbols
and
numbers,
for
instance,
representing
broadcasting
names,
for
each
preset
station.
If
you
attempt
to
enter
characters
while
receiving
an
FM
broadcast
RDS
station,
“RDS...PS”
is
displayed
and
characters
cannot
be
entered.
Characters which can be input
For
characters
on
the
upper
row,
the
keys
can
be
pressed,
while
for
characters
on
the
lower
row,
the
keys
should
be
pressed
while
the SCAN/S.LETTER button is held down.
5 MNO
3 GHI
3 ghi
2DEF
2def
Ooux*k /
0. ()
Note: 1 indicates a space.
To enter the characters a, 6, or U, press the CHARACTER
button while holding down the SCAN/S.LETTER button.
es) Ee C 2 [
C 30 oc 3 0 =]
aaa
Ta
ieee
®
Toname
1CHof
CLASS
Aas
ONKYO,
for
example,
operate
as
follows.
(Example:
FM
broadcast
at
89.500
MHz
has
been
memorized
into
1CH
of
CLASS
A.)
@
Press
the
CLASS
A
button.
@ The memorized broadcast station is received.
@ Press the CHARACTER button.
@ The frequency in the display goes off and “_” flashes.
@®
To
enter
O
from
ONKYO,
press
the
5MNO
button.
Pressing
the
button
each
time
changes
the
character
from
5
to
M,
N,
and
O,
one
at
a
time.
Select
O.
@
“
”
will
move
to
the
next
character.
(If
you
do
not
press
the
number
button
for
one
second
or more,
“_”
will
automatically
move
to the
next
character.)
SIGNAL STRENGTH STEREO
@ Repeat step @.
®
To
enter
N
from
ONKYO,
press
the
5MNO
button
and
select
N.
To enter K from ONKYO press the 4JKL button and select K.
®@ A maximum of 8 characters can be input.
CLASS
le] of oD
iE Pu
® Press the CHARACTER button.
®@
The
naming
operation
is
complete.
If
you
have
not
pressed
a
button
for
16
seconds,
the
operation
will
complete
automati-
cally.
@O® @®
™@ To change the character
@
Press
CLASS
A~F
buttons
to
recall
the
desired
preset
number.
@ Press the CHARACTER button.
@
“
"appears
at
the
first
character
and
it
flashes
alternately
with
the character.
@ Press the <4 DOWN/UP » button and move “_” to the character
you want to change.
@ “ ”’movestothe right when pressing the UP m button and moves
to the left when pressing the «4 DOWN button.
@ Enter the desired character.
@
The
previous
character
is
replaced
with
a
new
character.
@ Press the CHARACTER button.
@
The
change
is
complete.
If
you
have
not
pressed
the
button
for
46 seconds from the beginning, the change completes auto-
matically.
*
To
enter
a
space,
press
the
DIRECT/DELETE
button
while
press-
ing the SCAN/S.LETTER button at step @.
M@ To delete the characters
@
Press
the
CLASS
A~F
buttons
to
recall
the
preset
number
you
want
to change.
@ Press the CHARACTER button.
@
“
"appears
at
the
first
character
and
flashes
alternately
with
the
character.
@
Press
the
<
DOWN/UP
&
button
and
move
“_”
to
the
character
you want to delete.
@ “ "movestothe right when pressing the UP m button and moves
to the left when pressing the <¢ DOWN button.
@ Press the DIRECT/DELETE button.
@
The
character
is
deleted,
and
the
characters
on
the
right
move
to the left by one space.
®@
To
delete
all
characters
at
once,
move
the
“_”
to
the
first
character and hold down the DIRECT/DELETE button. The
character on the right moves to the left and the characters are
deleted one by one.
@ Press the CHARACTER button.
@ The character deletion is complete. If you have not pressed the
button for 16 seconds, it completes automatically.
pa ee
El