To Next PageTo Next Page
Need help?Do you have a question about the Onkyo T-4711 and is the answer not in the manual?
General| Tuning Bands | FM, MW |
|---|---|
| Preset Stations | 30 |
| Distortion (FM, stereo) | 0.3% |
| Type | Tuner |
| Tuning Range FM | 87.5 to 108 MHz |
| FM Sensitivity | 1.0 µV (mono), 20 µV (stereo) |
| Output | Fixed/Variable |
| Sensitivity | 1.9 µV (12.8 dBf) |
Essential safety guidelines including reading, retaining, and following all instructions and warnings.
Guidelines for safe placement, ventilation, heat management, power connection, and cleaning.
Procedures for preventing damage and when to seek professional servicing.
Instructions for grounding outdoor antennas to protect against voltage surges.
Location of the serial number for warranty claims.
Instructions for cleaning the unit's panels and cabinet.
Important notes on power connection and voltage selection.
How to set voltage and tuning step frequency for worldwide models.
Guide to inserting batteries into the remote control.
Tips for optimal use and placement of the remote control.
How to connect the tuner's output jacks to amplifier input jacks.
Information on the unit's switched AC outlets and capacity.
How to connect for remote control operation with other Onkyo components.
How to connect 300 ohm ribbon wire to the adaptor.
How to connect coaxial cable to the 75/300 ohm adaptor.
Step-by-step assembly for the AM loop antenna.
How to connect the antenna cable using a lever.
Identifies controls and indicators on the front panel of the unit.
Explains the various indicators and display elements.
Steps to connect the AC power cord and turn on the unit.
Lists and explains the functions of the remote control buttons.
How to tune in radio stations and save them as presets.
Details on the Automatic Precision Reception (APR) system for optimal signal settings.
How the IF BAND button corrects interference and improves reception.
Explanation of the HI-BLEND function for reducing noise in stereo signals.
Using the MODE button to improve reception of weak or noisy signals.
Explanation of RDS services like PS, PTY, TP, AF, RT, and CT.
How to search for stations broadcasting specific program types (PTY).
Step-by-step guide to naming stations or entering custom characters.
How to clear all characters stored in memory for a station.
How to set the clock automatically using RDS broadcast signals.
How to set WeekDay, WeekEnd, or Once timer for scheduled playback.
