EasyManua.ls Logo

Onkyo T-4030

Onkyo T-4030
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
E
n
DAB/FM Tuner
T-4030
Instruction Manual
Thank you for purchasing an Onkyo Tuner. Please read
this manual thoroughly before making connections and
plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new Tuner.
Please retain this manual for future reference.
Contents
Introduction..................................En-2
Connections.............................. En-10
Enjoying Audio Sources...... En-14
Appendix
Troubleshooting..................... En-22
Specifications ......................... En-23
Question and Answer IconNeed help?

Do you have a question about the Onkyo T-4030 and is the answer not in the manual?

Onkyo T-4030 Specifications

General IconGeneral
Power requirements230V, 50 Hz
Power consumption (standby)0.2 W
Power consumption (typical)8 W
PurposeHome
DAB tunerDAB+
RDS featuresPS, PTY, RT
FM band range87.5 - 108 MHz
Product colorSilver
Frequency range20 - 15000 Hz
Radio Data System (RDS)Yes
Preset stations quantity40
Total Harmonic Distortion (THD)1 %
Line outputs (RCA)2
Weight and Dimensions IconWeight and Dimensions
Depth307 mm
Width435 mm
Height101.5 mm
Weight4900 g

Summary

Important Safety Instructions

Precautions

Features

Supplied Accessories

Installing the Batteries

Instructions for inserting batteries into the remote controller for operation.

Aiming the Remote Controller

Guidance on the correct angle and distance for operating the remote control.

Getting to Know the Tuner

Front Panel

Identifies and explains the buttons and indicators on the front of the tuner.

Rear Panel

Details the various input and output jacks located on the back of the tuner.

Display

Explains the information shown on the tuner's display and its indicators.

Remote Controller

Describes the functions of each button on the included remote control.

Connecting Antennas

Connecting the DABFM Antenna

Step-by-step guide for attaching the supplied antenna to the tuner.

Connecting Your Components

Cable and Jacks

Describes different audio cable types and their corresponding jacks for connection.

Connecting to an Amplifier

Illustrates how to connect the tuner to an amplifier via analog or digital audio outputs.

RI Connection

Explains how to establish a Remote Interactive (RI) connection between Onkyo components.

Connecting Onkyo RI Components

Details system functions like Auto Power On and Direct Change via RI connection.

Connecting the Power Cord

Instructions for connecting the tuner to a power source.

Turning On and Standby

How to power the tuner on, off, and put it into standby mode.

Listening to the Radio

Listening to FM Stations

Steps for receiving FM radio broadcasts, including manual and auto tuning.

Tuning into Stations by Frequency

How to directly tune to FM stations by entering their specific frequencies.

Presetting FM Stations

Guide to storing favorite FM stations for quick access.

Selecting Presets

Methods for choosing previously stored FM radio presets.

Deleting Presets

Procedure for removing unwanted preset radio stations.

Presetting Automatically

How to automatically scan and store available FM stations.

Name Edit

Customizing names for preset radio stations for easier identification.

Using RDS

Explains how to use the Radio Data System features for enhanced radio information.

Listening to DAB Digital Radio

Instructions for tuning into and enjoying DAB digital radio broadcasts.

Using the Scan Function Manually

How to manually initiate a scan for available DAB stations.

Displaying DAB Radio Information

How to view detailed information about the selected DAB station.

Displaying Radio Text (RT)

How to view scrolling text information broadcast by RDS-enabled stations.

Finding Stations by Type (PTY)

Method for searching for radio stations based on program type categories.

Advanced Setup

Setting the Display Brightness

Adjusting the brightness level of the tuner's display screen.

Changing radio wave intensity

Modifying the search level for radio stations to filter weak signals.

Auto Standby

Configuring the automatic standby mode to conserve power when idle.

Troubleshooting

Power

Troubleshooting steps for issues related to the tuner not turning on.

Audio

Solutions for problems with no sound or low audio output.

Noise can be heard

Advice on reducing unwanted noise and interference in audio playback.

Tuner

Tips for improving radio reception and resolving signal quality issues.

Remote Controller

Steps to resolve issues with the remote control not functioning correctly.

Specifications

FM Tuner Specifications

Detailed technical specifications for the FM reception capabilities.

DABDAB+ Tuner Specifications

Detailed technical specifications for the DAB/DAB+ reception capabilities.

General Specifications

Overall technical details including power, dimensions, and weight.

Audio Outputs

Technical details related to the analog and digital audio output ports.

Other Specifications

Additional technical specifications not covered in other categories.

Related product manuals