Onkyo T-4030 User Manual

En-20
Listening to the Radio—Continued
Displaying Radio Text (RT)
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
1
Press the [PS/RT/PTY] button once.
The RT information scrolls across the display.
Notes:
• The message “Waiting” may appear while the
tuner waits for the RT information.
• If the message “No Text Data” appears on the
display, no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Press the [PS/RT/PTY] button twice.
The current PTY appears on the display.
“Not RDS” appears when RDS is not received.
2
Use the PRESET [a]/[s] buttons to select
the type of program you want.
“(PTY selected)?” will be shown on the display.
Note:
• The original display will be shown when an
operation is not performed 5 seconds after a
selection is made.
See the table on page 17.
3
Press the [AUTO SCAN] button to start PTY
scan function.
When the PTY you want to scan is found, the unit
will return to the regular operation.
When the PTY you want to scan cannot be found,
“Not Found” will be shown and the unit will return
to the regular operation.
PS/RT/PTY
PS/RT/PTY
PRESET
AUTO
SCAN

Onkyo T-4030 Specifications

General

Power requirements	230V, 50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	8 W
Purpose	Home
DAB tuner	DAB+
RDS features	PS, PTY, RT
FM band range	87.5 - 108 MHz
Product color	Silver
Frequency range	20 - 15000 Hz
Radio Data System (RDS)	Yes
Preset stations quantity	40
Total Harmonic Distortion (THD)	1 %
Line outputs (RCA)	2

Weight and Dimensions

Depth	307 mm
Width	435 mm
Height	101.5 mm
Weight	4900 g