Need help?Do you have a question about the Onkyo TA-630D and is the answer not in the manual?
General| Heads | 1 x record/playback, 1 x erase |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.8 cm/s |
| Motor | DC servo motor |
| Tape Type | Type I, CrO2, Metal |
| Inputs | Line |
| Type | single compact cassette deck |
| Noise Reduction | Dolby B |
| Frequency Response | 20Hz to 17kHz (Metal tape) |
| Output | 0.5V (line) |
| Outputs | Line |
| Dimensions | 435 x 112 x 313mm |
Lists component positions specific to the U.S.A. model.
Lists component positions specific to the Universal model.
Details the Accu-Bias control for optimal tape recording performance.
Describes the timer feature for automatic recording or alarm use.
Explains memory rewind and auto-stop tape transport functions.
Details the belt drive systems for flywheel and reels.
Further explanation of the auto-stop detection and operation.
Procedures for removing the cassette chassis and front panel.
Instructions for replacing key mechanical components like reels, motor, belts.
How to adjust door speed and tape tension during playback.
Safety notes and calibration for playback functions (azimuth, speed, output).
Procedures for setting bias and output levels for recording.
Adjusting the 19 kHz filter and Dolby circuits for recording.
Fine-tuning record bias and output levels for optimal recording.
Instructions for changing the unit's voltage setting for different regions.
Component lists for the amplifier and FM Dolby circuit boards.
Component lists for indicator and microphone circuit boards.
Component lists for the peak indicator and filter circuit boards.
Specific packing instructions for USA and Universal models.
Comprehensive list of mechanical parts with reference numbers.
To Next Page
