Onkyo TA-RW344 - Specifications; TA-RW544 Specifications; TA-RW344 Specifications

18
TA-RW544
Track Format: 4-track, 2-channels
Erasure System: AC erase
Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)
9.6 cm/sec. (3-3/4 i.p.s.) (high speed
dubbing)
Wow and Flutter: 0.07 % (WRMS)
Frequency Response: 20 — 15,000 Hz (Normal)
(30 — 14,000 Hz ± 3 dB)
20 — 16,000 Hz (High)
(30 — 15,000 Hz ± 3 dB)
20 — 17,000 Hz (Metal)
(30 — 16,000 Hz ± 3 dB)
S/N Ratio: Dolby NR off: 58 dB (metal position
tape)
A noise reduction of 10 dB above
5 kHz and 5 dB at 1 kHz is possible
with Dolby B NR.
A noise reduction of 20 dB at 5 kHz
is possible with Dolby C NR.
Input Jacks: Line IN: 2
Input sensitivity: 80 mV
Input impedance: 40 kohms
Outputs: Line OUT: 2
Standard output level: 500 mV
(0 dB)
Optimum load impedance: over
50 kohm
Headphone jack: 1
Optimum load impedance:
8 to 200 ohms
Motors: DC servo motor × 2, DC motor × 2
Heads: REC/PB: 2
ERASE: 2
Power Supply: European and Australian models:
AC 230V, 50 Hz
U.S.A. and Canadian models:
AC 120V, 60 Hz
Worldwide model:
AC 120V and AC 220-230V,
Switchable 50/60 Hz
Power Consumption: 31 watts
Dimensions: 435(W) × 121(H) × 305(D) mm
(17-1/8" × 4-3/4" × 12")
Weight: 5.9 kg. (13.0 lbs.)
Specifications
TA-RW344
Track Format: 4-track, 2-channels
Erasure System: AC erase
Tape Speed: 4.8 cm/sec. (1-7/8 i.p.s.)
9.6 cm/sec. (3-3/4 i.p.s.) (high-speed
dubbing)
Wow and Flutter: 0.07 % (WRMS)
Frequency Response: 20 — 15,000 Hz (Normal)
(30 — 14,000 Hz ± 3 dB)
20 — 16,000 Hz (High)
(30 — 15,000 Hz ± 3 dB)
20 — 17,000 Hz (Metal)
(30 — 16,000 Hz ± 3 dB)
S/N Ratio: Dolby NR off: 58 dB (metal position
tape)
A noise reduction of 10 dB above
5 kHz and 5 dB at 1 kHz is possible
with Dolby B NR.
A noise reduction of 20 dB at 5 kHz
is possible with Dolby C NR.
Input Jacks: Line IN: 2
Input sensitivity: 80 mV
Input impedance: 50 kohms
Outputs: Line OUT: 2
Standard output level: 500 mV
(0 dB)
Optimum load impedance: over
50 kohms
Headphone jack: 1
Optimum load impedance:
8 to 200 ohms
Motors: DC servo motor × 2, DC motor × 2
Heads: REC/PB: 1
PB: 1
ERASE: 1
Power Supply: European and Australian models:
AC 230V, 50 Hz
U.S.A. and Canadian models:
AC 120V, 60 Hz
Worldwide model:
AC 120V and AC 220-230V,
Switchable 50/60 Hz
Power Consumption: 29 watts
Dimensions: 435(W) × 121(H) × 305(D) mm
(17-1/8" × 4-3/4" × 12")
Weight: 5.9 kg. (13.0 lbs.)
Specifications and external appearance are subject to change
without notice because of product improvements.