Onkyo TX-7530 - Disassembling Procedures; Top Cover Removal; Front Panel Removal; Power Amplifier PC Board Removal

DISASSEMBLING PROCEDURES
1. Top cover
Remove a screw (3TTS+8BQ(BC)) holding the top cover and the back panel.
Remove the four screws (3TTS+8B(BC)) holding the back panel and the chassis.
2. Front panel
Remove the top cover.
Remove the six screws (3TTP+8P(BC)) holding the front panel and the front backet.
3. Power amplifier pc board
Remove the top cover.
Remove the five screws A.
Cut the binder B.
4. FM/AM tuner and selector switch pc board
Remove the top cover.
Remove the three screws C holding the pc board and chassis.
Remove the five screws D holding the back panel and chassis.
Remove the pc board from the two holders.
LD Cr eexie)
—~31—