Need help?Do you have a question about the Onkyo TX-904 and is the answer not in the manual?
General| Amplifier Type | Stereo Receiver |
|---|---|
| Tuning range | FM, MW |
| Input sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Tuner Type | Digital |
| Total harmonic distortion | 0.08% |
| Speaker load impedance | 4Ω to 16Ω |
Detailed specifications for the amplifier section of the unit.
Detailed specifications for the tuner section of the unit.
Specifications related to the video input and output.
General specifications including power supply and dimensions.
Block diagram and description of the LA1266 IC.
Block diagram and description of the AN7470 IC.
Block diagram and description of the BA7625 IC.
Block diagram and description of the LM7001 IC.
Block diagram and description of the LC7822N IC.
Block diagram and description of the LC7821N IC.
Block diagram and description of the LC7823N IC.
Block diagram and description of the LC7536 IC.
Block diagram and description of the µPC1298V IC.
Block diagram and description of the NJM2175L IC.
Block diagram and description of the M50198P IC.
Description of the µPD17103CX-531 IC.
Description of the μPD6345C IC.
Description of the BA6125 IC.
Description of the TA7291S IC.
Description of the SI-18751 IC.
Steps and settings required before performing adjustments.
Specific adjustment procedure for the amplifier section.
Adjustment procedures for the AM section.
Instructions for safely replacing fuses with correct types.
Procedure for changing FM/AM band step settings.
Information on the unit's memory back-up system.
Safety checks before releasing the unit to the customer.
Instructions for setting the voltage selector.
To Next Page
