Controlling Other Components
En-78
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
INPUT MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
(North American and Taiwanese models)
` 33101:
MHL-enabled mobile device
(European, Australian, and Asian models)
` 32910:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p
*1
(limited to some models). The component must be able to
receive remote control commands via p and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
` 32910/33101/33501/31612:
Blu-ray Disc/DVD player with p
*1
The p supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ TV operation
■ Blu-ray Disc/HD DVD player operation
h
l
m
n
o
k
j
g
c
b
d
a
e
f
i
h
l
m
n
o
k
j
g
c
b
d
a
e
f
i
Press the appropriate REMOTE
MODE button first.
Available buttons
a 8, INPUT, TV VOL q/w g
Number: 1 to 9, 0
b
GUIDE
Number: +10
*1
c q/w/e/r
ENTER
i
DISPLAY
j
MUTING
d
SETUP
k
CH +/–
e 1, 3, 2, 5, 4,
7, 6
*1
l
PREV CH
m
RETURN
f
A
(Red)
*1
n
AUDIO
*1
B
(Green)
*1
o
CLR
C
(Yellow)
*1
D
(Blue)
*1
Available buttons
b
TOP MENU
h 8SOURCE
c q/w/e/r
ENTER
i
DISPLAY
j
MUTING
d
SETUP
k
CH +/–
e 1, 3, 2, 5, 4,
7, 6
DISC +/–
l
MENU
f
A
(Red)
m
RETURN
B
(Green)
n
AUDIO
*1
C
(Yellow)
o
CLR
D
(Blue)
g
Number: 1 to 9, 0
Number: +10
*1
To Next Page
Loading...
