To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-NR609 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Output impedance | 2200 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 240 W |
| Dynamic power per channel (4 Ohm) | 210 W |
| Dynamic power per channel (8 Ohm) | 120 W |
| Power output per channel (20-20KHz@8 Ohm) | 160 W |
| HDMI in | 6 |
| PC in (D-Sub) | Yes |
| Composite video in | 1 |
| Multichannel audio input type | RCA |
| Component video (YPbPr/YCbCr) in | 2 |
| Banana connector | 14 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector/Binding posts |
| Audio formats supported | AAC, FLAC, LPCM, MP3, OGG, WAV, WMA |
| Wi-Fi | No |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Last.fm, Napster, vTuner |
| Supported video modes | 1080i, 720p |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Pro Logic, Dolby TrueHD, DTS-HD |
| Volume control | Rotary |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 610 W |
| Certification | Windows 7 CE, EMC |
| THX-certified | THX Select2 Plus |
| Package weight | 15000 g |
| Package depth | 423 mm |
| Package width | 570 mm |
| Package height | 297 mm |
| Compatible operating systems | Windows 7 |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 11300 g |
Warning about exposure to moisture to prevent fire or shock.
Caution to avoid electric shock by not removing the back cover.
FCC information for users regarding digital device compliance and interference.
Canadian compliance information for digital devices.
Instructions for installing batteries in the remote controller.
Guidance on aiming the remote controller at the AV receiver's sensor.
Specifications for the AV receiver's amplifier section.
Details of audio and video processing capabilities.
List of available input and output connection types.
Features like presets, Audyssey settings, and A/V sync control.
Diagram and explanation of the AV receiver's front panel controls and indicators.
Explanation of various icons and indicators shown on the AV receiver's display.
Illustration and labeling of rear panel connection terminals.
Instructions for controlling the AV receiver using the remote.
How to use the remote controller to operate the AV receiver's tuner.
Detailed guide on connecting speaker cables to the AV receiver terminals.
How to use provided labels for correct speaker cable connection.
Important safety and connection guidelines for speakers.
Tips for positioning and connecting a powered subwoofer.
Notes on removing jumper bars and speaker compatibility for bi-amping.
General guidelines for connecting AV components via HDMI or other cables.
Descriptions of various audio and video cable types and their jacks.
How the ARC function enables TV audio to be sent to the HDMI OUT.
Table detailing default assignments for various input jacks and ports.
How RI enables automatic component power-on.
How RI automatically selects the input source during playback.
Using the AV receiver remote to control RI-capable Onkyo components.
Instructions for assembling the AM loop antenna.
Step-by-step guide to powering on the AV receiver.
Step-by-step guide to powering off the AV receiver.
How to set the language for onscreen setup menus.
Procedures for playing audio/video from connected sources.
How to browse and control files on USB or network devices.
Table explaining icons shown during media playback.
List of supported iPod and iPhone models.
Instructions for accessing and using the vTuner Internet Radio service.
Options available in the Internet Radio top menu for managing favorites.
Steps to configure Windows Media Player 11 for server playback.
Overview of playing music files remotely via network.
Steps to configure Windows Media Player 12 for server playback.
How to adjust volume during remote playback.
Methods for tuning into radio stations using auto or manual modes.
How to select saved AM/FM radio stations.
Explanation of the Radio Data System feature.
How to search for radio stations based on program type.
Guide to automatic speaker configuration using Audyssey 2EQ.
Steps for positioning the microphone for speaker setup measurements.
Troubleshooting steps if the subwoofer is not detected by Audyssey.
How to select different listening modes using buttons on the remote or receiver.
Notes on speaker layout and terminology used in listening modes.
Supported audio formats for different listening modes.
Illustrations showing speaker activation for various channel configurations.
Table detailing Onkyo's proprietary DSP listening modes and their applications.
Explanation of Dolby Pro Logic IIz Height mode for enhanced audio.
Details on Dolby EX mode for expanding 5.1 channel sources.
Information on Dolby Digital, Plus, and TrueHD audio formats.
Information on DTS, DTS-HD, and DSD audio formats.
Explanation of Audyssey DSX system for improved surround impression.
Overview of THX modes for optimizing audio for home theater environments.
How to select input sources and view related information via the Home menu.
Adjusting audio settings like Bass, Treble, and Audyssey via the Home menu.
Changing video settings like Wide Mode and Picture Mode via the Home menu.
Viewing audio, video, and tuner information through the Home menu.
Selecting listening modes by category using the Home menu.
Steps for recording audio and video sources to external components.
Overview of the on-screen setup menu structure and navigation.
General steps for navigating and making selections in setup menus.
Setting output resolution for HDMI OUT and upconversion options.
Assigning HDMI inputs to specific input selectors.
Manual adjustment of speaker parameters after initial setup.
Setting for normal or bi-amped front speakers.
Enabling or disabling powered Zone 2 speaker output.
Setting for subwoofer presence and crossover frequency.
Selecting the number of surround back speakers connected.
Manually adjusting the tone of individual speakers with a 5-band equalizer.
THX-specific audio settings like subwoofer type and boundary gain compensation.
Selecting audio channels or output speakers for mono sources.
Settings for Dolby Pro Logic IIx, Panorama, Dimension, and Center Width.
Handling of Dolby EX encoded signals.
Adjusting center image for DTS Neo:6 Music mode.
Adjusting soundstage and theater-dimensional settings.
Enabling or disabling Audyssey audio processing for movie or music.
Activating Audyssey Dynamic EQ for improved sound at low volumes.
Adjusting reference level offset for different content types.
Setting the aspect ratio for video output.
Applying preset or custom picture settings for movies or games.
Enabling game mode to reduce video signal delay.
Automatic detection and conversion for movie signals.
Adjusting picture sharpness.
Reducing screen noise.
Adjusting the picture's brightness level.
Adjusting the picture's contrast level.
Adjusting the red/green balance of the picture.
Adjusting the color saturation level.
Routing TV audio signals to the HDMI OUT using the Audio Return Channel.
Prioritizing HDMI audio input when assigned.
Prioritizing coaxial audio input when assigned.
Prioritizing optical audio input when assigned.
Specifying listening modes for DTS audio formats.
Specifying listening modes for multichannel PCM and DSD sources.
Configuring volume display, muting level, maximum volume, and power-on volume.
Adjusting headphone volume relative to main volume.
Enabling or disabling onscreen display of operation details.
Selecting the language for onscreen setup menus.
Changing the AV receiver's remote ID code to avoid conflicts.
Enabling HDMI control for interoperability with compatible components.
Setting the URL for a web proxy.
Setting the port number for a web proxy.
Enabling or disabling network control features.
Specifying the network port for control operations.
Options for updating receiver firmware via network or USB.
Options for updating Universal Port device firmware.
Looking up and entering remote control codes for components.
Locking setup menus to prevent unauthorized changes.
Adjusting bass and treble for front speakers.
Adjusting individual speaker volume levels.
Settings related to Audyssey processing, EQ, and volume.
Ways to connect Zone 2 speakers directly or via an additional amplifier.
Setup for 5.1ch main room and 2ch stereo in Zone 2.
Setup for 7.1ch main room and 2ch stereo in Zone 2.
Turning Zone 2 on/off and selecting sources using the receiver.
Controlling Zone 2 functions using the remote controller.
How to adjust volume for Zone 2 speakers.
How to mute Zone 2 audio output.
Information on using the Onkyo Dock for iPod/iPhone playback.
How system functions like Auto Power On work with the dock.
Using the iPod/iPhone alarm clock to turn on the receiver.
How the dock charges the iPod/iPhone battery.
Remote control functionality for UP-A1 Dock via Universal Port.
Remote control functionality for RI Dock.
Controlling components with RI via receiver remote.
Controlling components without RI using receiver remote.
List of components controllable with preprogrammed remote modes.
How to find remote control codes via the setup menu.
Procedure for entering remote control codes for components.
Solutions for AV receiver power-on, shutdown, and protection circuit activation.
Troubleshooting for no sound, quiet sound, or incorrect audio output.
Issues with specific speakers not producing sound or incorrect volume.
Problems with playback modes, signal formats, noise, and listening functions.
Troubleshooting for no picture, HDMI issues, and menu display.
Solutions for noisy AM/FM reception or stereo indicator issues.
Troubleshooting steps for a non-functional or partially functional remote controller.
Issues with controlling TVs, players, or other components.
Troubleshooting recording failures and Zone 2 audio issues.
Solutions for accessing music servers, internet radio, and web browsers.
Troubleshooting issues accessing or playing music files from USB devices.
Issues with RI functions, speaker setup, video settings, and system lockups.
How to connect TV for component or composite video sources.
Assigning inputs for component and composite video sources.
Diagram showing how to connect the AV receiver to a home network.
Necessary network configurations like Ethernet, router, and internet access.
Supported technologies for playing digital music files from servers.
System requirements for WMP11 on Windows XP.
Requirements for Windows Media Player 12 remote playback.
Requirements for USB storage devices for playback.
Specifications for MP3 audio file format support.
Specifications for WMA audio file format support.
Specifications for WAV audio file format support.
Specifications for AAC audio file format support.
Specifications for FLAC audio file format support.
Specifications for Ogg Vorbis audio file format support.
Specifications for LPCM audio file format support.
Procedure for updating firmware using a network connection.
Preparatory steps before performing a network firmware update.
Preparatory steps before updating firmware using a USB device.
Step-by-step guide for updating firmware via USB.
Table of error codes and their descriptions during USB firmware updates.
Explanation of video connection types like composite, component, and HDMI.
How the AV receiver prioritizes and selects video input signals.
Diagram illustrating audio signal flow through different input types.
List of audio formats supported over HDMI connections.
Explanation of HDCP copy protection for digital video signals.
List of components compatible with RIHHD system control.
Linked operations possible with RIHHD-compatible TVs and players.
Steps to connect HDMI and confirm settings for linked operation.
Recommended HDMI menu settings for RIHD and ARC.
Verification steps after initial setup and linking components.
Operating components using the AV receiver's remote.
Technical specifications for the amplifier's power and performance.
General specifications including power supply, dimensions, and weight.
Specifications for HDMI input, output, video resolution, and supported formats.
Specifications for composite, component, and analog RGB video inputs.
Specifications for digital and analog audio input types.
Specifications for speaker terminals and headphone jack.
Specifications for AM/FM tuning frequency ranges and preset channels.
Chart showing HDMI output resolutions for various input signals.
Chart showing component output resolutions for various input signals.
Chart showing composite output resolutions for various input signals.
