Onkyo TX-RZ610

6
> Before start > Hookup > Setup > Playback > Part Names
16
( Ä P3)
78
Height Speakers
Choose one of the following:
$
$
$
Top Front Speakers
Top Middle Speakers
Top Rear Speakers
For 7.1-Channel System
(with Height Speakers-B)
This is a basic 5.1-channel system using ceiling speakers,
for example, with the addition of height speakers, either
as top front speakers, top middle speakers, or top rear
speakers. Select which speakers to setup according to
the environment of the room. You can select the Dolby
Atmos listening mode (5.1.2 channel playback), which
realizes the most up-to-date 3D surround sound including
overhead sounds, when the input format is Dolby Atmos.
With formats other than Dolby Atmos, you can still create
a sound field by outputting sound from the height
speakers when you select the Dolby Surround listening
mode. Fit top front speakers on the ceiling forward of the
seating position, top middle speakers on the ceiling
directly above the seating position, and top rear speakers
on the ceiling behind the seating position. The distance
between each pair should match the distance between
the two front speakers.
0 Dolby Laboratories recommends placing this type of
height speakers to obtain the best Dolby Atmos effect.
＊ 1: 30e to 55e, ＊ 2: 65e to 100e, ＊ 3: 125e to 150e
Go To "Hookup" ( Ä P9)
＊
1
＊
2
＊
3

SN29402171_TX-RZ610_BAS_En_1602xx.book 6 ページ ２０１６年２月４日 木曜日 午後１時４４分