Onkyo SR705 - TX AV Receiver User Manual

E n
AV Receiver
TX-SR705
AV Amplifier
TX-SA705
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver/
AVAmplifier. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver/
AV Amplifier.
Please retain this manual for future reference.
Contents
Introduction......................................2
Connections...................................21
First Time Setup ............................45
Basic Operations ...........................59
Advanced Operations....................75
Advanced Setup.............................76
Zone 2 .............................................99
Controlling Other Components..104
Specifications ..............................109
Troubleshooting...........................110
TX-SR705_En.book Page 1 Monday, May 28, 2007 2:13 PM

Onkyo SR705 - TX AV Receiver Specifications

General

HDMI Outputs	1
Dolby Atmos	No
DTS:X	No
Network Capability	No
Weight	12.6 kg
Signal-To-Noise Ratio	106 dB
Audio D/A Converter	192kHz/24-bit
Input Sensitivity	200 mV
Tuner Presets	40
Total Harmonic Distortion (THD)	0.08 %
Audio Channels	7.1
Amplifier Output Details	100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Input Impedance	47 kΩ
Video Inputs	HDMI x 3
Surround Sound Modes	Dolby Digital
Power Output (per channel)	100W (8 ohms, 20Hz-20kHz, 0.08% THD)
Response Bandwidth	5Hz-100kHz
Frequency Response	5Hz-100kHz