To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR700/E and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Channels | 7.1 |
| Frequency Response | 10 Hz-100 kHz |
| Total Harmonic Distortion | 0.08% |
| Video Connections | Composite, S-Video, Component |
| Impedance | 8 ohms |
| Input Sensitivity | 200 mV (Line) |
| Signal to Noise Ratio | 100 dB |
| Speaker Impedance | 6 - 16 Ohms |
| Digital Audio Inputs | Optical, Coaxial |
| Analog Audio Inputs | RCA |
| Speaker Terminals | Binding Post |
| Dimensions | 435 x 175 x 459 mm |
| Weight | 15.4 kg |
| Power Output | 100 Watts per channel (8 Ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven, FTC) |
Detailed specifications for the amplifier output and input parameters.
Specifications for FM and AM tuner sensitivity, selectivity, and frequency response.
Covers power supply, power consumption, dimensions, and weight of the unit.
Guide for replacing fuses, including part numbers and model variations.
Procedure to reset the unit to factory settings, restoring preset memory.
Instructions for setting the voltage selector switch on worldwide models to match local power supplies.
Detailed list of parts for various circuit boards identified in the exploded view.
Detailed list of parts for various components and panels shown in the exploded view.
Shows the signal flow for various analog audio inputs from PHONO to VIDEO.
Details the signal path for composite video inputs from DVD to VIDEO 4.
Illustrates the signal flow for S-Video inputs from DVD to VIDEO 4.
Shows component/soldering sides of Component video terminal and Equalizer amp. PC boards.
Shows component/soldering sides of the U5 Video terminal PC board.
Shows PC boards related to power supply and output stages.
Shows the U23 Driver circuit PC board, detailing component layout.
Schematic for the display section, showing connections to microprocessors and indicators.
Schematic for the DSP section, showing input/output paths and connections to the main processor.
Schematic for the power amplifier section 1, showing output transistors and biasing.
Schematic of the power supply section, showing transformers, fuses, and voltage selectors.
Diagram showing interconnections between various PC boards.
Connection views for various circuit boards, illustrating interconnections.
Diagram showing connections to the Q7001 Main Microprocessor.
Diagrams showing connections to the Sub-Microprocessors Q7501 and Q7502.
Describes pins for serial data, clock, and chip select for OSD and other ICs.
Details the function, I/O type, and description for each terminal of the sub-microprocessor.
Procedure to adjust idling current for front, center, surround, and surround back channels.
Procedures to confirm speaker relay operation and DC detection circuit functionality.
Procedure to test current detection using a 200Hz square signal and various loads.
Procedure to confirm voltage sensor operation and check relays with specific signals and resistors.
Lists the contents of the accessory bag, including manuals, cables, and batteries.
Details the steps and materials required for packing the unit, including labels and cartons.
