Do you have a question about the Onkyo TX-SR705 and is the answer not in the manual?
Guide to selecting operating modes and using the remote for various components.
General advice and color coding for connecting AV components.
Table showing speaker connections based on the number of speakers used.
Important safety and connection guidelines for speakers.
Detailed guide for connecting front speakers, including bi-amping.
How to connect audio and video simultaneously from source components.
Step-by-step guide for connecting TVs and projectors for video and audio.
Detailed instructions for connecting DVD players for video and audio.
How to connect DVD players with multichannel analog audio output.
Guide to connecting VCRs or DVD recorders for playback.
Instructions for connecting VCRs or DVD recorders for recording.
How to connect satellite receivers, cable boxes, and other video sources.
Guide for connecting game consoles for video and audio input.
Instructions for connecting camcorders and similar devices via AUX inputs.
Explanation of HDMI interface, its capabilities, and compatibility requirements.
Step-by-step guide for making HDMI connections for video and audio.
Instructions for connecting CD players and turntables, including phono preamp details.
Guide for connecting tape decks, CDRs, and MiniDiscs for playback and recording.
How to power the unit on and off, and enter standby mode.
Initial setup steps for optimal performance after purchase.
Overview of the setup menus available for initial configuration.
Step-by-step guide to navigate and use the onscreen setup menus.
Guide to configuring speaker impedance and type (Normal/Bi-Amp).
Setting to determine how video signals are handled via HDMI output.
How to assign HDMI inputs to specific input selectors for correct signal routing.
Instructions for assigning component video inputs and configuring upconversion.
Guide to assigning digital input jacks (Coaxial/Optical) to input selectors.
Guide to using the microphone for automatic speaker calibration and setup.
Explains common error messages during automatic speaker setup and how to resolve them.
How to choose the AV component to listen to or watch.
How to tune into AM and FM radio stations.
Overview of how to select different listening modes.
Table showing listening mode compatibility with various audio source formats.
Detailed explanations of various listening modes like Pure Audio, Direct, Stereo, Mono, Dolby, DTS, THX.
How to record audio and video sources to connected recorders.
How to record audio and video from different sources simultaneously.
How to check or manually set speaker configurations and crossover frequencies.
How to specify speaker distances for accurate sound arrival time.
How to adjust speaker levels using a built-in test tone for balanced output.
Settings related to listening mode adjustments, including tone and channel controls.
Settings related to input sources, including IntelliVolume and A/V Sync.
Settings for volume display, muting level, maximum volume, power on volume, and headphone level.
Configuration settings for HDMI connections, including audio out and Lip Sync.
Methods for connecting and enjoying audio in a second zone.
How to enter codes to control other AV components with the receiver's remote.
Solutions for when the unit fails to power on.
Troubleshooting steps if the protection circuit activates upon power-on.
Steps to diagnose and resolve issues with no or low audio output.
Steps to resolve issues where no video picture is displayed.
Troubleshooting steps for recording problems.
Solutions for no picture from HDMI inputs, often related to resolution errors.
Troubleshooting steps for a non-functional remote controller.