To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX SR608 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Package depth | 570 mm |
| Package width | 423 mm |
| Package height | 297 mm |
| Dimensions (WxDxH) | 435 x 176 x 329 mm |
| Power requirements | AC 230 V, 50 Hz |
| Product color | Silver |
| Package weight | 14000 g |
| Power consumption (typical) | 620 W |
Weight and Dimensions| Weight | 11500 g |
|---|
Read, heed, and follow all safety instructions before using the apparatus.
Covers care, power, hearing loss, battery, and general handling notes.
FCC information for US models and compliance for Canadian models.
Details on power output, amplifier technology, and power supply.
Information on THX certification, HDMI upscaling, and audio formats.
Overview of available input and output jacks for various components.
Features like radio presets, room correction, and A/V sync.
Identification and function of buttons and jacks on the front panel.
Instructions for operating the AV receiver using the remote.
How to use the remote controller to select AM/FM stations.
Guidance on creating a surround sound environment.
Guidance on connecting speakers, including cable management.
Important warnings and guidelines for connecting speakers.
Instructions on stripping wires and using connectors for speaker cables.
Details on dipole speakers, subwoofers, and bi-amping.
Diagrams and explanations for HDMI connections.
Overview of common AV signal types, cables, and jacks.
How to connect various components using HDMI inputs.
Explanation of the ARC function for audio transmission.
Instructions for connecting various external audio/video sources.
Steps for connecting Onkyo components using RI for system control.
Guidance on choosing video connection formats for optimal quality.
Explanation of automatic input selection priority.
Guidance on choosing audio connection formats.
Steps to select and play audio/video from connected sources.
How to view input source and signal format details.
Adjusting the brightness of the AV receiver's display.
Basic operation of the built-in AM/FM tuner.
Methods for tuning into radio stations: auto and manual.
Explanation of Radio Data System and its features.
Searching for radio stations based on program type.
Locating stations that broadcast traffic news.
How to connect a recording device to the AV receiver.
Recording audio and video from different sources simultaneously.
Description of buttons for selecting listening modes.
Supported audio formats for listening modes.
Illustrations showing speaker activation for different layouts.
Overview of the AV receiver's setup menu structure.
General steps for navigating and making settings in the setup menu.
Setting the output resolution for HDMI and Component Video.
Assigning HDMI inputs to input selectors.
Setting the front speaker connection type (Normal, Bi-Amp).
Specifying speakers connected to Front High/Wide/Zone 2 terminals.
Setting speaker types, crossover frequencies, and subwoofer presence.
Selecting audio channels or languages from multiplex sources.
Settings for Dolby Pro Logic IIx, EX, and Digital formats.
Adjusting front stereo image width and sound field position.
Adjusting the center channel sound width.
Enabling Audyssey settings like Dynamic EQ and Volume.
Enabling Game Mode to reduce video signal delay.
Setting the aspect ratio for the picture.
Selecting preset picture modes or custom settings.
Adjusting volume display, mute level, max volume, and power-on volume.
Configuring on-screen display and language settings.
Setting the TV system for proper menu display (NTSC/PAL).
Selecting the language for on-screen setup menus.
Setting a unique ID for remote control to avoid interference.
Determining if HDMI audio is output to the TV speakers.
Enabling HDMI lip sync for audio/video delay correction.
Enabling HDMI control for inter-component system control.
Adjusting bass and treble for front speakers.
Methods for connecting speakers for Zone 2 playback.
Setup for Powered Zone 2 to play stereo in another room.
Connecting Zone 2 speakers to an external amplifier.
Steps to turn Zone 2 on/off and select input sources.
Overview of Onkyo docks for iPod connectivity.
Basic operation, auto power, and remote control for UP-A1 dock.
Using the ND-S1 Digital Media Transport with iPod.
List of components with preprogrammed remote control codes.
Procedure to search for remote control codes via the setup menu.
Troubleshooting steps for a flashing red STANDBY indicator.
Troubleshooting no sound or low volume problems.
Diagnosing problems with specific speakers not producing sound.
Troubleshooting signal format, noise, and late night function problems.
Troubleshooting no audio or video from HDMI connections.
Steps to resolve issues where on-screen menus are not displayed.
Resolving noisy reception or missing FM STEREO indicator.
Troubleshooting when the remote controller does not work.
Troubleshooting no sound from Zone 2 analog inputs.
Troubleshooting no sound from Zone 2 speakers.
Troubleshooting System On/Auto Power On and Direct Change.
Resolving measurement failures during Audyssey setup.
Adjusting settings for composite video inputs.
Tips for improving picture quality with video playback.
Detailed specifications for the AV receiver's amplifier.
General specifications including power supply, dimensions, and weight.
Specifications for HDMI, video inputs, and outputs.
Specifications for audio inputs, outputs, and tuner functions.
Introduction to HDMI technology and its capabilities.
List of audio formats supported via HDMI.
Explanation of HDCP copy protection for digital video.
List of components compatible with RIHD system control.
Operations possible when connecting RIHD-compatible devices.
Steps to confirm HDMI connections and initial settings.
Modifying HDMI control, ARC, power, and TV control settings.
Verifying system control operations after setup.
