Onkyo TX-SR603X User Manual

En
AV Receiver
TX-SR603X
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
any connections and plugging it in.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction......................................2
Connections...................................20
First Time Setup.............................38
Basic Operations ...........................51
Advanced Operations....................64
Advanced Setup.............................68
Zone 2 .............................................74
Controlling Other Components....78
Specifications ................................83
Troubleshooting.............................84

Onkyo TX-SR603X Specifications

General

Brand	Onkyo
Model	TX-SR603X
Category	Receiver
Language	English

Summary

Important Safety Instructions

Precautions

Connecting the AV Receiver

Turning On the AV Receiver

Procedures for powering on the AV receiver using front panel or remote.

First Time Setup

Automatic Speaker Setup

Automatically measures and sets speaker parameters using a microphone.

Initial Setup

Assigns digital inputs and configures basic video settings.

Speaker Setup

Manual configuration of speaker size, crossover, and distance.

Speaker Level Calibration

Adjusts individual speaker volume levels to match the listening position.

Equalizer Setting

Manual adjustment of the equalizer for individual speakers.

Advanced Operations

Adjusting Individual Speaker Levels

Temporarily adjusts the volume for each speaker during playback.

Recording

Explains how to record audio/video sources and dub audio onto recordings.

Zone 2

Connecting Zone 2

Setting the Powered Zone 2

Enables or disables the speaker terminals for Zone 2 operation.

Using Zone 2

How to turn on Zone 2, select input sources, and adjust volume for the second zone.

Controlling Other Components

Entering Remote Control Codes

How to program the receiver's remote to control other AV equipment.

Learning Commands from Other Remote Controllers

Using Macros

Specifications

Troubleshooting