Onkyo TX-SR600/E - User Manual

BMDD,BMDC 120V AC, 60Hz
BMPP,BMPA,SMPP,GMPA 230~240V AC, 50Hz
BMWT,GMWT,GMWR,GMWQ 120/220~230V AC, 50/60Hz
GMGK 220V AC, 50Hz
0
TX-SR600/E
SERVICE MANUAL
SERVICE MANUAL
AV RECEIVER
Black, Golden and Silver models
MODEL TX-SR600/E
Ref. No. 3730
052002
RC-480M
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.

Onkyo TX-SR600/E Specifications

General

Channels	6.1
Frequency Response	10 Hz-100 kHz (+1 dB, -3 dB)
Total Harmonic Distortion	0.08%
Input sensitivity	200 mV (Line)
Digital inputs	2 Optical, 1 Coaxial
Video Connections	Composite, S-Video
Phono Input	Yes
Headphone Jack	Yes
Remote Control	Yes
Power Output	80 W (8 ohms, 20 Hz-20 kHz, 0.08% THD)
Input Impedance	47kΩ (line)
Signal-to-Noise Ratio	100 dB
Tuning range	FM, AM
Signal to noise ratio	100 dB
Speaker load impedance	6 ohms - 16 ohms
Video Inputs	3 x composite, 2 x S-Video
Video Outputs	1 x composite, 1 x S-Video
Analog Audio Outputs	2
Speaker Terminals	Binding Posts
Analog Audio Inputs	5

Summary

Service Procedures

Replacing Fuses

Instructions and part numbers for replacing fuses, including safety notes.

Block Diagram 1

Block Diagram 2

Schematic Diagram 4-1 (Power Amplifier Section 1)

Schematic Diagram 5-1 (Power Amplifier Section 3)

Schematic Diagram 6-1 (Power Supply Section)

Main Microprocessor Connection Diagram

Sub Microprocessor Terminal Description

Adjustment and Confirmation Procedures 1

Idling Current Adjustment

Procedure to adjust idling current for front/center and surround channels.

Adjustment and Confirmation Procedures 2