Do you have a question about the Onkyo TX TX-SR606 and is the answer not in the manual?
HDMI Inputs | 4 |
---|---|
HDMI Outputs | 1 |
Signal-To-Noise Ratio | 106 dB |
THD | 0.08 % |
Input Sensitivity | 200 mV |
Preset Station Qty | 40 |
HDMI Switching | Yes |
Audio D/A Converter | 192kHz/24-bit |
Digital Sound Processor (DSP) | Yes |
Dolby Technologies | Dolby Digital, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby TrueHD |
DTS Technologies | DTS, DTS-ES, DTS Neo:6, DTS-HD |
Weight | 12.3 kg |
Input Impedance | 47 kΩ |
Tuner Type | Digital |
Tuning Range | FM: 87.5-108 MHz, AM: 522-1611 kHz |
Surround Sound Effects | Theater-Dimensional |
Channel Qty | 7 |
Frequency Response (Direct Mode) | 5 Hz-100 kHz |
Video Inputs/Outputs | HDMI |
Audio Inputs/Outputs | Optical digital input, coaxial digital input, audio line-in, audio line-out |
HDMI Version | HDMI 1.3a |
HDMI Features | x.v.Color, Deep Color |
Amplifier Type | AV |
Illustrates the typical arrangement of speakers in a main room setup for optimal sound.
Visual diagram showing how to physically connect speakers to the AV receiver's terminals.
Connects AV components using HDMI for simple audio/video transfer and lists relevant connections.
Details on configuring HDMI input assignments via onscreen menus for proper signal recognition.
Explains hookups using analog or digital connections if HDMI is not supported by devices.
Instructions for assigning digital inputs like coaxial for audio signals when not using HDMI.