To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR601E and is the answer not in the manual?
Legality of recording copyrighted material for personal use only.
Location and servicing of the AC fuse within the chassis.
Instructions for cleaning the appliance's exterior panels.
Important warnings and instructions regarding power connection and voltage.
Note for CATV system installers regarding grounding.
User caution regarding modifications and FCC compliance.
Note on compliance with Canadian ICES-003.
Caution to match wide blade of plug to wide slot for safety.
List of accessories included with the receiver for initial setup.
Key steps and considerations before operating the receiver for the first time.
Explanation of controls and displays on the front panel of the receiver.
Details and diagrams of the remote controller functions and buttons.
Detailed instructions and diagrams for connecting various audio and video components.
Diagrams and labels for the front panel controls of the TX-SR701/701E/601/601E.
Illustration and labeling of the RC-533M remote controller buttons.
Explanation of how MODE buttons select components and their indicators.
Buttons used to operate other Onkyo components via RI terminals.
Detailed examples of connecting CD players, turntables, and tape decks.
Instructions for connecting VCRs, DVD players, and monitors via various video inputs.
Guidelines for connecting front, center, surround, and back speakers for optimal sound.
Recommendations for optimal placement of speakers in a listening room.
Steps to plug in the unit and turn on the main power supply.
Procedure to turn on the receiver using the remote controller.
Instructions for assembling the AM loop antenna.
Guidance on connecting FM indoor and AM loop antennas.
Setting speaker sizes (Large/Small) and subwoofer connection for optimal sound.
How to access the main setup menu on the TV or front display.
Steps to select FM or AM input and tune to a desired radio station.
How to achieve stereo reception and use FM MODE for MONO.
Explanation of Radio Data System and its broadcast services.
List of program type classifications available via RDS broadcasts.
General steps for selecting input sources and adjusting volume using the remote.
How to adjust the main volume for all speakers and headphones.
Mode for playing old movies or media with monaural sound.
Mode for pure sound with minimum adjustment, outputting to front speakers only.
Mode for high-fidelity music playback with display and video circuit off.
Mode where all input sound is output from front speakers, with subwoofer use.
Mode for matrix-encoded 5.1-channel surround audio playback.
Mode for playing Dolby Digital sources with up to 5.1-channel surround.
How DTS-ES settings (Auto, On, Off) affect playback.
How Dolby Digital EX settings (Auto, On, Off) affect playback.
Assigning digital input jacks (OPT1/2, COAX) to input sources.
Configuring surround back speakers and Zone 2 operation modes.
Specifying the use of one or two surround back speakers.
Setting the IR IN position for main zone or remote zone operation.
Selecting TV signal format (PAL/NTSC) for automatic detection.
Adjusting headphone volume output to match speaker volume.
Selecting background color for OSD Setup Menu display.
Turning off or selecting display format for operations on TV screen.
Choosing between Absolute and Relative display methods for volume.
Adjusting bass and treble levels for front left and right speakers.
Boosting bass by outputting low frequencies to the subwoofer.
Narrowing dynamic range for easier listening at low volumes, especially at night.
Steps to select input sources and control output for the remote zone (Zone 2).
How to turn on Zone 2 output and select input sources via remote.
How to adjust volume for Zone 2 speakers using front panel or remote.
Selecting input sources for recording via TAPE OUT jacks.
Introduction to the remote controller's capabilities for operating the receiver and other components.
Steps to select a stored radio station using the TUNER input.
How to operate an Onkyo cassette tape deck using the remote controller.
Step-by-step guide for learning commands from other remote controllers.
Procedure to program a sequence of operations into a single macro button.
How to run a programmed macro sequence using the remote controller.
Solutions for power-related issues like no power or automatic shut-off.
Troubleshooting sound issues related to speakers, including center and subwoofer.
Solutions for problems with AM/FM reception and sound quality.
Overview of basic operation for enjoying audio and visual sources.
Reference to detailed pages for speaker connection instructions.
General
