Onkyo TX-SR605 User Manual

E n
AV Receiver
TX-SR605
AV Amplifier
TX-SA605
TX-SA8560
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver/
AVAmplifier. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver/
AVAmplifier.
Please retain this manual for future reference.
Contents
Introduction......................................2
Connections...................................18
First Time Setup ............................41
Basic Operations ...........................54
Advanced Operations....................69
Advanced Setup.............................70
Zone 2 .............................................87
Controlling Other Components....90
Specifications ................................93
Troubleshooting.............................94

Onkyo TX-SR605 Specifications

General

Channels	7.1
HDMI Inputs	2
HDMI Outputs	1
Response Bandwidth	5 Hz - 100 kHz
Signal-To-Noise Ratio	106 dB
THD	0.08%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Audio D/A Converter	192kHz/24-bit
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	4
Input Channel Qty	7
Output Channel Qty	7
Tuner Bands	AM/FM
Frequency Response	5 Hz - 100 kHz
Power Output	90 Watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven)
Dolby Technologies	Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD
DTS Technologies	DTS, DTS 96/24, DTS-ES
Amplifier Output Details	90W (8 Ω, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven)
Dimensions (W x H x D)	435 x 190 x 400 mm