Onkyo TX-SR605

63
Using the Listening Modes—Continued
Dolby Digital, Dolby Digital Plus, and TrueHD Sources
*1. During input of a 96 kHz TrueHD signal, the only sound balance or sound quality adjustment that can be made is Tone control. The AV receiver/
AV amplifier does not respond to a 192 kHz TrueHD signal.
*2. If there are no surround back speakers, depending on the input signal, Dolby Digital may be used.
*3. If there are no surround back speakers, or Powered Zone 2 is being used, Pro logic II is used.
*4. Available only when using surround speakers.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Source format
Dolby D Dolby Digital Plus
TrueHD
*1
Multichannel
2ch 1/0, 1+1
Multichannel
2ch 1/0, 1+1
Multi-
channel
2ch 1/0, 1+1
*/2
except
*/2
*/2
except
*/2
Media
Listening mode
DVD, DTV, etc. Blu-ray, HD DVD Blu-ray, HD DVD
Pure Audio (not North
American models)
✔✔✔✔✔✔✔✔ ✔ ✔✔
Direct
✔✔✔✔✔✔✔✔ ✔ ✔✔
Stereo
✔✔✔✔✔✔✔✔ ✔ ✔✔
Multichannel
Dolby D
✔✔
Dolby Digital Plus
✔
*2
✔
*2
DTS, DTS 96/24
DTS Discrete/Matrix
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
✔
PLII Movie/PLIIx Movie
*3
✔ ✔ ✔ ✔
PLII Music/PLIIx Music
*3
✔ ✔ ✔ ✔
PLII Game/PLIIx Game
*3
✔✔
Dolby Digital EX/Dolby EX
✔ ✔
Neo:6
✔ ✔
Neo:6 Cinema
✔✔
Neo:6 Music
✔✔
Neural Surround (North
American models only)
Mono
✔✔✔✔✔✔✔✔
Onkyo Original DSP
Mono Movie
*4
Orchestra
*4
Unplugged
*4
Studio-Mix
*4
TV Logic
*4
✔✔✔✔
All Ch Stereo
Full Mono
✔✔✔✔✔✔✔✔
T-D
✔✔✔✔
Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 55.