To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR603/603E and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200 mV |
| Digital Inputs | 3 x Optical, 2 x Coaxial |
| Frequency Response | 10 Hz - 100 kHz |
| Phono Input | Yes |
| Multi-room Output | Yes |
| Headphone Output | Yes |
| Power Output | 90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Video Inputs | 4 x Composite, 2 x S-Video |
| Video Outputs | 1 x Composite, 1 x S-Video |
Critical safety warnings and precautions for operating the AV receiver.
How to configure speaker setups, use dipole speakers, and attach speaker labels.
Important warnings and instructions for connecting speaker wires correctly.
Guide to connecting the supplied indoor FM and AM antennas for radio tuning.
Information on using outdoor antennas and TV/FM antenna splitters.
How to achieve synchronized audio and video connections from components.
Step-by-step for connecting TVs/projectors via various video and audio formats.
How to connect a DVD player using different video and audio connection methods.
Connecting DVD players with 5.1-channel analog audio for multichannel sound.
Instructions for connecting VCRs and HDD/DVD recorders for playback.
How to set up a VCR for recording and playing back video.
Connecting satellite receivers, cable boxes, set-top boxes, and LD players.
How to connect devices like camcorders and game consoles using various inputs.
Instructions for connecting CD players, cassette recorders, and DAT/CD/MD recorders.
Guide to performing automatic speaker setup using the included microphone.
How to check results and choose options like Apply, Check, Retry, or Cancel.
Controls for front speaker tone and initial audio adjustment settings.
Methods for connecting audio sources and speakers for Zone 2 operation.
How to program the remote to control other AV devices by entering codes.
Detailed specifications for amplifier, video, tuner, and general components.
Solutions for common power issues, no sound, quiet sound, and speaker problems.
Resolving issues with audio formats, video display, menus, and DTS signals.
Troubleshooting tuner reception, remote control, component compatibility, recording, and Zone 2.
Addressing miscellaneous issues like headphone sound and display problems, plus factory reset.
