To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR506 and is the answer not in the manual?
General| Frequency range | 50 - 100000 Hz |
|---|---|
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Radio Data System (RDS) | Yes |
| Connectivity technology | Wired |
| Product color | White |
| Dimensions (WxDxH) | 435 x 379.2 x 149.6 mm |
| Power consumption (typical) | 480 W |
Weight and Dimensions| Weight | 10600 g |
|---|
List of essential safety guidelines to follow before operating the AV receiver.
Safety advice to avoid handling the unit with wet hands to prevent shock.
Details on amplifier specifications like wattage, WRAT, and power supply.
Lists audio processing features like Dolby Digital, DTS, Music Optimizer, and DSP.
Overview of available input/output connections including HDMI, Component, Digital, and analog.
Identifies and explains the controls and indicators on the front panel of the AV receiver.
Identifies and explains the various input/output jacks on the rear panel.
Explains how to use the remote to control the AV receiver's main functions.
Important notes on speaker impedance, wiring polarity, and cable usage.
Guide on choosing appropriate connection formats based on component capabilities.
Overview of available video connection types (Composite, S-Video, Component, HDMI).
Overview of available audio connection types (Analog, Optical, Coaxial, Multichannel, HDMI).
Step-by-step guide for connecting a TV or projector via video and audio.
Instructions for connecting a DVD player using various video and audio formats.
Guide to connecting multichannel audio sources like DVD-Audio and SACD.
Steps for connecting a VCR/DVR to play back content through the AV receiver.
Instructions on how to connect a VCR/DVR for recording content.
Guide for connecting various video source devices.
Explains HDMI interface, supported formats, and copyright protection.
Step-by-step guide for connecting HDMI-compatible devices.
Guide for connecting CD players and turntables, including phono preamp requirements.
Steps to power the AV receiver on and put it into standby mode.
Quick guide for initial setup tasks like speaker setup and input configuration.
Detailed guide for the automatic speaker setup process using the microphone.
Guide to assigning HDMI inputs to input selectors for proper signal routing.
Instructions for assigning component video inputs to specific input selectors.
Steps to assign digital audio inputs (Coaxial, Optical) to input selectors.
How to configure the receiver to automatically select audio inputs based on signal presence.
Core steps for selecting sources, starting playback, adjusting volume, and choosing listening modes.
Table detailing available listening modes for analog and PCM sources.
Table showing listening modes available for Dolby Digital and Dolby Digital Plus sources.
Table showing listening modes available for DTS, DTS 96/24, and DTS Discrete/Matrix sources.
Explains how different listening modes transform audio and provides an overview of modes.
Instructions on recording audio and video from various sources to external recorders.
Explains how to adjust sound and listening modes using various settings.
How to access and adjust audio settings like tone controls and Late Night function.
Enhancing sound quality at low volumes by adjusting frequency response and surround levels.
Specifying default listening modes for different audio formats and input selectors.
How to check and manually set speaker configurations (size, connection).
Explains how to specify connected speakers and their sizes (Small/Large).
Setting crossover frequencies for speakers based on their size for optimal bass.
How to manually set speaker distances for accurate sound localization.
Adjusting individual speaker volume levels for balanced output.
Adjusting the tone of individual speakers or using Audyssey/Manual EQ settings.
Setting up source-specific options like IntelliVolume and A/V Sync.
Activating the Powered Zone 2 feature to enable Zone 2 speakers.
How to turn Zone 2 on/off, select input sources, and adjust volume.
Step-by-step guide to enter remote control codes for new components.
Detailed button functions on the remote for controlling DVD players.
Detailed button functions on the remote for controlling VCRs or PVRs.
Detailed button functions on the remote for controlling satellite/cable receivers.
Detailed button functions on the remote for controlling CD/MD players/recorders.
Detailed button functions on the remote for controlling an iPod via RI Dock.
Detailed button functions on the remote for controlling cassette recorders.
Detailed button functions on the remote for controlling a TV, especially via RIHD.
Troubleshooting steps for issues like the receiver not turning on or turning off immediately.
Troubleshooting for no sound, quiet sound, or distorted audio issues.
Troubleshooting for situations where there is no picture.
Steps to take if the remote controller is not working or not controlling other components.
Repeats amplifier specifications for the TX-SR576 model.
Configuration options for HDMI audio output, Lip Sync, x.v.Color, and RIHD control.
