Onkyo TX-SR507 User Manual

E n
AV Receiver
TX-SR507
TX-SR577
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ...................................2
Connections ................................15
Turning On & First Time Setup ...36
Basic Operations.........................45
Using the Listening Modes ........59
Advanced Setup ..........................66
Zone 2 ...........................................80
Controlling Other Components ...84
Others...........................................93

Onkyo TX-SR507 Specifications

General

HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
THD	0.08%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Audio D/A Converter	192kHz / 24-bit
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	6
HDMI Switching	Yes
3D Technology	Yes
HDMI Pass-Through	Yes
Amplifier Type	Discrete
Frequency Response	10 Hz - 100 kHz
Signal-to-Noise Ratio (Model 3)	100 dB
Audio Formats Supported	Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Amplifier Output Details	80W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Additional Features	Audyssey Dynamic EQ
Weight	22.04 lbs (10 kg)
Weight (Model 3)	22.04 lbs (10 kg)

Summary

Important Safety Instructions

Precautions

Front & Rear Panels

Front Panel

Identifies and explains the purpose of all front panel connectors and controls.

Rear Panel

Remote Controller

Connecting the AV receiver

Connecting Your Speakers

Provides instructions and diagrams for connecting speakers to the AV receiver.

Connecting a Powered Subwoofer

Turning On the AV receiver

First Time Setup

Audyssey 2EQ™ Room Correction and Speaker Setup

Essential setup for automatic room correction and speaker configuration.

Basic Operations

Basic AV receiver Operation

Covers fundamental operations like selecting sources and adjusting volume.

Using the Listening Modes

Selecting the Listening Modes

Advanced Setup

Common Procedures in Setup Menu

Speaker Setup

Explains how to configure speaker settings manually or after auto setup.

Audio Adjust Settings

Controlling Other Components

Preprogrammed Remote Control Codes

Entering Remote Control Codes

Troubleshooting