To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR508 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 5 - 100000 Hz |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Package depth | 537 mm |
| Package width | 416 mm |
| Package height | 268 mm |
| Dimensions (WxDxH) | 435 x 151 mm |
| Power requirements | AC 230 V, 50 Hz |
| Product color | Black |
| Power consumption (typical) | 450 W |
| Package weight | 12000 g |
Weight and Dimensions| Weight | 9400 g |
|---|
Guidance on speaker configuration, wiring, and connection precautions.
How to connect and configure HDMI-compatible devices.
Guide to connecting various external audio and video sources.
Procedure for powering on the AV receiver using the front panel or remote.
Procedure for putting the AV receiver into Standby mode.
How to select and play audio/video from connected sources.
Step-by-step guide to performing automatic room and speaker setup.
Troubleshooting common error messages during Audyssey setup.
Storing and selecting favorite radio stations.
How to choose and activate different listening modes.
Accessing and navigating the receiver's setup menus via TV display.
Specifying connected speakers and their sizes (Small/Large).
Setting the crossover frequency for optimal speaker bass performance.
Specifying speaker distances for accurate sound arrival time.
Adjusting speaker volume levels for balanced sound.
Fine-tuning various audio settings like bass, treble, and speaker levels.
Configuring hardware settings like speaker impedance and type.
Configuring HDMI-related features like Audio TV OUT and Lip Sync.
Adjusting Audyssey EQ, Dynamic EQ, and Dynamic Volume.
Correcting audio/video sync issues by delaying audio signals.
Methods to connect Zone 2 speakers directly or to an external amplifier.
Enabling and configuring the Powered Zone 2 feature.
Turning Zone 2 on/off and selecting sources.
Operating Zone 2 functions using the AV receiver's remote.
How to control the volume for Zone 2 playback.
Connecting iPod docks (UP-A1, ND-S1, RI Dock) to the AV receiver.
Troubleshooting steps for protection circuit activation.
Troubleshooting steps for no sound or very quiet audio output.
Troubleshooting steps for the AV receiver not turning on.
Troubleshooting steps for no video picture.
Resolving no picture issues specifically for HDMI sources.
Troubleshooting why the on-screen setup menus are not displayed.
Troubleshooting steps for a non-functional remote controller.
Troubleshooting issues controlling other connected components.
Troubleshooting no sound, no video, or remote control issues with iPod dock.
Step-by-step instructions for connecting and setting up RIHD.
