To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-SR505E and is the answer not in the manual?
General| Audio Channels | 7.1 |
|---|---|
| Amplifier Type | Discrete |
| HDMI Inputs | 2 |
| HDMI Outputs | 1 |
| Component Video Inputs | 2 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 2 |
| Digital Audio Inputs (Coaxial) | 1 |
| Dolby Digital | Yes |
| DTS | Yes |
| FM Tuner | Yes |
| Weight | 8.3 kg |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08% |
| Signal-to-Noise Ratio | 106 dB |
| Analog Audio Inputs | 5 |
| Power Output | 75W (8 Ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven) |
| Tuner | AM/FM |
| Input Sensitivity and Impedance | 200 mV/47 k-ohms |
| Video Inputs/Outputs | Composite: 4 in/1 out |
| Dimensions (W x H x D) | 435 x 151 x 329 mm |
Explains how to use two sets of speakers for main and secondary listening areas.
Identifies and describes the controls and indicators on the front of the AV receiver.
Explains the indicators and information shown on the AV receiver's display.
Illustrates and identifies the various input and output jacks on the rear of the AV receiver.
Details how to use the remote controller for various AV components and modes.
Explains how to operate a DVD player using the remote controller.
Details operating CD, MD, CDR, or DOCK components with the remote.
Instructions for opening the battery compartment and inserting batteries.
Guidance on pointing the remote controller towards the AV receiver's sensor.
Explains how to achieve surround sound with connected speakers.
Details speaker setup options based on the number of speakers used.
Important warnings and guidelines for connecting speaker cables and impedance.
Instructions for using color-coded labels to identify speaker terminals.
Describes the use of the tool for tightening speaker terminals.
Step-by-step guide for connecting speaker set A to the AV receiver.
Step-by-step guide for connecting speaker set B to the AV receiver.
Instructions for connecting a powered subwoofer to the receiver.
Guide for assembling and connecting the supplied AM loop antenna.
Instructions for attaching the supplied indoor FM antenna.
Advice on installing an outdoor FM antenna for better reception.
Guidance on installing an outdoor AM antenna for improved reception.
Explains how to use a splitter to connect both TV and FM antennas.
General advice, color coding, and cable types for making AV connections.
How to connect audio/video signals for simultaneous switching of input sources.
Guide to choosing appropriate connection formats based on component support.
Step-by-step instructions for connecting a TV or projector to the receiver.
Guide for connecting a DVD player to the AV receiver for video and audio.
Connecting DVD players with multichannel analog audio outputs.
How to connect HDMI-compatible devices to the AV receiver.
Steps to connect a VCR or DVD recorder for playback.
Instructions for connecting a VCR/DVD recorder for recording purposes.
How to connect various devices like camcorders or game consoles.
Connecting satellite/cable receivers or set-top boxes.
Guide for connecting CD players and turntables, including phono preamp options.
Connecting Onkyo RI Dock components for interactive control.
Steps to connect tape recorders, CDRs, MD, or DAT recorders.
How Onkyo components connected via RI function, including auto power and remote control.
Instructions for connecting the AV receiver's power cord to a wall outlet.
Explains how to turn the AV receiver on and put it into standby mode.
Guides through initial setup steps for smooth operation.
Automatic room and speaker calibration using the supplied microphone.
Setting minimum speaker impedance for models not in North America.
Step-by-step process for running the Audyssey 2EQ automatic speaker setup.
Explains common error messages encountered during automatic speaker setup.
How to manually adjust speaker settings if automatic setup fails.
Tips for setting up a powered subwoofer for automatic speaker detection.
Instructions on how to re-run the automatic speaker setup procedure.
Assigning video inputs to input selectors for specific components.
Configuring digital audio input assignments for various sources.
Modifying input selector display names for RI functionality.
Fundamental steps for operating the AV receiver and selecting sources.
How to view details about the current input source and signal format.
Connecting and using components with multichannel analog audio outputs.
Guide to tuning into AM and FM radio stations using auto or manual modes.
Detailed steps for auto and manual tuning of radio stations.
Setting the AM frequency step for North American and European models.
How to tune into radio stations by directly entering their frequency.
Storing favorite radio stations as presets for quick access.
How to recall stored radio presets.
Instructions for removing stored radio presets.
Explains Radio Data System features for European models.
Definition and types of information provided by Radio Data System.
How to view text information broadcast by RDS stations.
Searching for radio stations based on program type.
How to find and listen to stations broadcasting traffic news.
How to adjust bass and treble for the front speakers.
Temporarily silencing the AV receiver's audio output.
Adjusting the brightness of the AV receiver's display.
Setting the AV receiver to turn off automatically after a specified period.
Connecting headphones for private listening.
Adjusting the volume level for individual speakers.
How to choose different audio listening modes.
Descriptions of various listening modes and their speaker configurations.
Softens overly bright movie soundtracks for a theater-like experience.
Reduces dynamic range for low-volume listening, ideal for late-night viewing.
Configuring channel output for multiplex sources and mono modes.
Adjusting Panorama and Dimension for stereo sources in PLII/PLIIx modes.
Adjusting the width of the sound from the center speaker.
Specifying the front speaker angle for Theater-Dimensional mode.
Adjusting subwoofer sensitivity for different DVD player outputs.
How to record audio from selected input sources to a component.
Recording audio and video from different sources simultaneously.
Manually configuring speaker size, type, and configuration.
Specifying connected speakers, their sizes, and subwoofer presence.
Setting crossover frequencies for speakers based on their size.
Boosting bass output by feeding front channel sounds to the subwoofer.
Setting speaker distances from the listening position for accurate sound staging.
Adjusting individual speaker volume levels for balanced sound.
Adjusting tone settings for individual speakers at various frequencies.
Explains display indicators for Dolby Digital, DTS, and PCM formats.
Adjusting audio delay to correct sync issues with progressive scan sources.
How to program the remote controller to operate other AV components.
Specific remote control codes for Onkyo RI-connected devices.
Restoring a REMOTE MODE button to its default remote control code.
Returning the remote controller to its original factory settings.
Using the remote to control TV functions like channels and volume.
Using the remote to control VCR functions like playback and channels.
Operating satellite or cable receivers with the remote.
Solutions for problems related to turning the AV receiver on or it turning off unexpectedly.
Troubleshooting steps for no sound, quiet sound, or incorrect speaker output.
Diagnosing why only front speakers produce sound.
Troubleshooting when only the center speaker is active.
Addressing issues where surround speakers do not produce sound.
Steps to resolve problems with the subwoofer not producing sound.
Reasons why speaker set B might not produce sound.
Checking settings for specific signal formats causing no audio.
Issues related to achieving surround sound playback formats.
Explains why the maximum volume level might be reduced.
Tips for reducing audio noise caused by cables or interference.
Troubleshooting common problems with the remote controller not working.
Solutions for problems encountered during the recording process.
Information on the AV receiver's battery-less memory backup system.
Information about SIRIUS Satellite Radio availability and requirements.
Instructions for connecting the SiriusConnect Home tuner kit.
How to set the AV receiver to XM or SIRIUS satellite radio mode.
Steps and information required for subscribing to SIRIUS Satellite Radio.
Selecting SIRIUS as the satellite radio input source.
Three methods to select SIRIUS channels: search, category, or direct tuning.
How to switch back to the previously selected SIRIUS channel.
Storing favorite SIRIUS channels as presets.
How to select channels using the AV receiver's front panel controls.
Recalling stored SIRIUS presets using the remote controller.
Removing stored SIRIUS presets.
Locking specific channels to prevent unauthorized viewing.
Procedures for changing the Parental Lock PIN.
Viewing channel name, category, artist, and song title for SIRIUS radio.
Adjusting tuner position to optimize satellite signal strength.
Explains common messages displayed during SIRIUS radio operation.
Information on XM Satellite Radio availability, features, and subscription.
Steps for connecting the XM Mini-Tuner and home dock for XM radio.
Setting the AV receiver to XM satellite radio mode.
Information and steps for subscribing to XM Satellite Radio service.
Three methods to select XM channels: search, category, or direct tuning.
How to switch back to the previously selected XM channel.
Storing favorite XM channels as presets.
How to select channels using the AV receiver's front panel controls.
Recalling stored XM presets using the remote controller.
Removing stored XM presets.
Viewing channel name, category, artist, and song title for XM radio.
Adjusting tuner position to optimize XM signal strength.
Explains common messages displayed during XM radio operation.
