5
 
■
 
Selecting Presets
 
■
 
Deleting Presets
 
Parental Lock
 
You can lock out channels that you do not want to 
receive.
 
To unlock a previously locked channel
 
, select the 
locked channel (see step 4), press the Left and Right 
[ ]/[ ] buttons so that the asterisk disappears (see step 
5), and then press [ENTER]. The message “Unlocked” 
will appear on the display.
 
Changing the PIN Number
 
1
 
To select a preset, use the PRE-
SET [ ]/[ ] buttons, or the 
remote controller’s CH [+/–] but-
ton.
 
1
 
Select the preset that you want to 
delete.
 
See the previous section.
 
2
 
While holding down the [MEM-
ORY] button, press the 
[TUNING MODE] button.
 
The preset is deleted and its number 
disappears from the display.
 
1
 
Press the [SETUP] button.
 
2
 
Use the Up and Down [ ]/[ ] 
buttons to select “Parental Lock,” 
and then press [ENTER].
 
“Lock   :    <0>” appears on the dis-
play.
TUNING
PRESET
CH
DISC
ALBUM
MEMORY
TUNING MODE
CLEAR
SETUP
 
3
 
Press the [D TUN] button, and 
then use the number buttons to 
enter the PIN number.
Or
Use the Left and Right [ ]/[ ] 
buttons to change the number 
displayed between the angle 
brackets < >, and then press 
[ENTER]. Repeat this for each 
digit in the PIN number.
 
4
 
Select the channel that you want 
to lock out, for example:
 
5
 
Press the Left and Right [ ]/[ ] 
buttons so that an asterisk 
appears next to the name, as 
shown below, and then press 
[ENTER]:
 
The message “Locked” will appear on 
the display.
 
6
 
Press the [SETUP] button.
 
Setup closes.
 
1
 
Press the [SETUP] button.
D TUN
DIMMER
ENT
SLEEP
11 12
VCR/DVR CBL/SAT
C
 
DTAPE TUNER
DVD
MULTI CHAUX
0
CLR
123
456
789
Asterisk
SETUP
SETUP
SiriusSR505En Page 5 Tuesday, January 30, 2007 11:40 AM