EasyManua.ls Logo

Onkyo TX-SR507 - Bi-Amping Front Speakers (TX-SR577 Only)

Onkyo TX-SR507
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Connecting the AV receiver—Continued
The FRONT L/R and SURR BACK L/R terminal posts
can be used with front speakers and surround back
speakers respectively, or bi-amped to provide separate
tweeter and woofer feeds for front speakers, providing
improved bass and treble performance.
• When bi-amping is used, the AV receiver is able to
drive up to 5.1 speakers in the main room.
• For bi-amping, the FRONT L/R terminal posts
connect to the front speakers’ woofer terminals. And
the SURR BACK L/R terminal posts connect to the
front speakers’ tweeter terminals.
• Once you’ve completed the bi-amping connections
shown below and turned on the AV receiver, you must
set the “Sp Type” setting to “Bi-Amp” to enable bi-
amping (see page 40).
Important:
• When making the bi-amping connections, be sure
to remove the jumper bars that link the speakers’
tweeter (high) and woofer (low) terminals.
• Bi-amping can only be used with speakers that support
bi-amping. Refer to your speaker manual.
Bi-amping Speaker Hookup
Bi-amping Front Speakers (TX-SR577
only)
1
Connect the AV receiver’s FRONT R positive (+)
terminal to the right speaker’s positive (+) woofer
(low) terminal. And connect the AV receiver’s
FRONT R negative (–) terminal to the right
speaker’s negative (–) woofer (low) terminal.
2
Connect the AV receiver’s SURR BACK R
positive (+) terminal to the right speaker’s positive
(+) tweeter (high) terminal. And connect the AV
receiver’s SURR BACK R negative (–) terminal
to the right speaker’s negative (–) tweeter (high)
terminal.
3
Connect the AV receiver’s FRONT L positive (+)
terminal to the left speaker’s positive (+) woofer
(low) terminal. And connect the AV receiver’s
FRONT L negative (–) terminal to the left
speaker’s negative (–) woofer (low) terminal.
4
Connect the AV receiver’s SURR BACK L
positive (+) terminal to the left speaker’s positive
(+) tweeter (high) terminal. And connect the AV
receiver’s SURR BACK L negative (–) terminal to
the left speaker’s negative (–) tweeter (high)
terminal.
L
R
FRONT SPEAKERS
L
R
Right speaker
Left speaker
Woofer (low)
Tweeter (high)
Tweeter (high)
Woofer (low)

Table of Contents