Onkyo TX-RZ920

10
> Specifications > Advanced Setup > Listening Modes
> Network Functions > Basic Manual
|Troubleshooting Supplementary Information, etc�
Setting Item Default Value Setting Details
CD --- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the CD button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the CD button.
TV --- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the TV button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the TV button.
PHONO --- "COMPONENT 1", "COMPONENT 2": Assign the
COMPONENT VIDEO IN jacks to the PHONO
button.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the PHONO button.
■ 4� Digital Audio Input
You can change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
Setting Item Default Value Setting Details
BD/DVD COAXIAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the BD/DVD button.
CBL/SAT COAXIAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the CBL/SAT button.
GAME OPTICAL 1 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the GAME button.
STRM BOX --- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the STRM BOX button.
PC --- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the PC button.
Setting Item Default Value Setting Details
CD OPTICAL 2 "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the CD button.
TV --- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the TV button.
PHONO --- "COAXIAL 1", "COAXIAL 2", "OPTICAL 1",
"OPTICAL 2": Assign a desired DIGITAL IN jack to
the PHONO button.
•
Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32kHz, 44.1kHz,
48kHz, 88.2kHz, 96kHz/16bit, 20bit, and 24bit.