Your new TV is heavy, please consult with professional wallmount installer to perform this installation.
Do not install the stands if you want to wall mount your TV. See your wall mount instructions or chat live
at www.onntvsupport.com.
1. Place the TV screen-down on a clean, flat, soft surface (ie: blanket) to prevent scratches or damage to the screen.
2. Use a Phillips screwdriver to attach each stand with the provided screws.
3. Place the TV upright on a stable, level surface.
A wall mount kit (purchased separately) would allow you to mount your TV on the wall. For detailed information on installing
the wall mount, refer to the instruction. Manufacuter is not responsible for any damage to the product or injury to yourself or
others resulting from the wall-mounting.
- This TV is compatible with a 100mm x 100mm(24 inch), 200mm x 100mm(32 inch) mounting hole pattern.
- 4 pcs of type M4x5(ISO metric) screws are required for installing the wall mount bracket lo your TV. Screws not provided.
- Do not use screws that are longer than 5mm. Screws that are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the TV to fall.
- Do not mount the TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. it may result in personal injury due to electric shock.
Wall Mounting
To Next Page
Loading...
Need help?
General
