January 16, 2020_V1
Clock & Sleep Timer
Alarm
Tuning the AM or FM Radio
1. Press the Power/Source/Al O button to
turn the clock radio on.
2. Press the Power/Source/Al O button
again to switch between AM and FM Radio
Mode.
3. Press the Tun+/- buttons to adjust the radio
to the desired frequency.
4. Press and hold the Tu n+/- buttons to
search for the next available frequency.
5. Press the Vo l+/- buttons to adjust the
volume.
6. Press and hold the Power/Source/Al O to
turn the radio o.
Radio
Setting the Clock
1. If in Radio Mode, press and hold the
Power/Source/Al O button to
turn the unit o.
2. Press and hold the Clock/Mem button until
the display begins to blink, then release
the button.
3. Press the Hour button to adjust the hour.
The PM indicator will light when the hour is
set in the PM.
4. Press the Min button to adjust the minute.
5. Press the Clock/Mem button to finish
setting the time.
Setting the Sleep Timer
Note: There may be up to a 1 minute deviation in
the sleep timer.
1. Press the Snooze/Sleep button repeatedly
to set the sleep timer ( 90, 80, 70, 60, 50, 40,
30, 20, 10 or OFF ).
2. Once the set sleep time has expired the
clock radio will automatically power o.
Setting the Alarm
1. If in Radio Mode, press and hold the Power/
Source/Al O button to turn the unit o.
2. Press the AL1 or AL2 button until the display
begins to blink.
3. Press the Hour button to adjust the hour.
The PM indicator will light when the hour is
set in the PM.
4. Press the Min button to adjust the minute.
5. Press the AL1 or AL2 buttons repeatedly to
switch between Radio and Buzzer.
6. Once the set alarm time is reached, the
alarm will sound.
7. To set the other alarm, follow the above
steps and choose the alarm not currently
set.
Disabling the Alarm
• Press the AL1 or AL2 buttons repeatedly until
the indicator is no longer lit.
Saving and Tuning to a Station as
a Preset
1. Tune to the desired station.
2. Press the Clock/Mem button to cycle
through preset radio stations.
3. Press Tun+/Tun- to select which preset
you want to save the station to. Up to 10
stations can be saved.
4. Press the Clock/Mem to save selected
station.
5. To cycle through presets press the Clock/
Mem button and press the Tun+/Tun- to
select which preset you want to listen to.
Radio Reception
A wired FM antenna is built into the clock radio and
exits from the rear of the unit. To improve radio
reception, adjust the position of the antenna, or if
need be, adjust the position of the clock radio.
Snooze and Alarm Reset
After the alarm sounds:
• Press the Snooze/Sleep button to delay the
alarm for several minutes.
• Press the Power/Source/Al O button to
turn the alarm o until the set alarm time is
reached again.
To Previous Page
Loading...
Need help?
General
