11
1.Luminaire frequency
Can be adjust to 50Hz, 60Hz with your local source frequency.
The default is 60Hz.
2.Time zone setting
You can set the time zone of the current location manually. The
defaults to UTC/GMT+8.
3.Speed Unit
can be set to: KM/H, MPH. The default is KM/H.
4.Screen Domant
can be adjust to: OFF, 1min, 3min, 5min. The default is "1min".
For example:
1.Setting for 1min, the dash cam does not do any operation,
the screen will turned off and goes to sleep after 1 minute.You
can check the recording status by looking at the green indicator
in the upper left corner:
*Frequent flashing indicates that recording is ON.
*Always on indicates that recording is STOP.
2.Setting for “OFF”, the screen will not go out to sleep, it will
light up.
To Next Page
Loading...