12
5.Auto Power Off
can be adjust to: OFF, 3min, 5min, 10min. The default is "OFF".
6.USB Mode
can be set to: Charge, UVC, and Storage. The default is "Charge".
1.When set to "Charge", the machine plugged into the USB cable can
only be used for charging.
2.When set to "UVC", the device can be used as a PC camera when
the machine is plugged into a USB cable to connect to the computer.
3.When set to "Storage", after the machine is plugged into the
USB cable to connect to the computer, the external storage device
TF card in the machine can be read and written.
Note: To achieve UVC and storage function, the USB cable must be
equipped with data transmission.
7.G-Sensor
can be set to: OFF, Low, Middle and High. The default is "Middle".
If set to “OFF”, the device will not activate the emergency
recording function when it encounters a collision.
To Next Page
Loading...