6
onsenproducts.ca
800-996-5559
Insert the included hose barb or threaded quick connect adapters in the
inlet and outlet pump ports , and slide clips to lock port connec-
tions.
If using the included strainer, insert into the inlet port and slide clip to
lock port connection.
Use ½” (13mm) I.D. exible hose (preferably braided or reinforced) to
connect to the inlet and outlet of the pump. Use hose clamps to secure
the hose to the hose barb connectors (if hose barb adapters are being
used).
A
A B C
C
C
B
STEP 2
CONNECT WATER LINES
To Next Page
Loading...