11
Turn-by-Turn Navigation
Continued from previous page
• “Get My Destination”- to nd the distance to the
destination and the next maneuver to be made.
• “Help”- to play all voice commands. Push the
button to stop the play of the voice commands.
• “English - Metric Setting”- to change system from
English to Metric measurements. Push the
button to switch to Metric measurements. Note:
Some vehicles need to be set using the vehicle
Metric settings control; please see your vehicle
owner’s manual for more information.
• “Store Route Destination” – to store current
destination. The system will ask for a name tag to
store a destination for later use. Up to 10 route
destinations can be stored.
• “Plan Route”- to obtain directions to a stored route.
The system will ask for the assigned name tag for the
stored route destination.
• “Route Destination Directory” – to hear all of the stored
route destination name tags.
• “Delete Route Destination” - to delete a specic stored route.
• “Delete All Name Tags” - to delete every name tag stored, including Hands-Free
Calling name tags.
• “Go Back” – to go back to the previous step.
Note: After every voice command, the system returns to the main voice menu
by saying,
“OnStar ready”
and giving the talk-tone and waits for another
command. To exit the system, say “Goodbye.”
How to Stop Current Driving Maneuvers
To cancel play of the current maneuvers, push the button. Only the current
maneuver will be cancelled, not the entire route.
Note: Pushing the button will disconnect a Hands-Free call.
NOTE: If the
announcement
“You
have left the planned
route. Do you need
directions to get back
on route?”
occurs
and the response is
“No,” the route will
not be cancelled
and the destination
will be saved to the
system. To obtain
a new route to the
saved destination,
push the button
and say, “Update
route.” The system
will automatically
recalculate directions.
To Next Page
Loading...
