27
Camera
1. Select menu using the left selection key.
2. Then using the up/down arrow keys scroll through until you have highlighted camera,
then select ok using the left selection key
3. The camera function will then open.
4. To take a photo click on the up arrow key. It will then take about 3 seconds for that photo
to automatically save.
Camera Settings/Options
1. While in camera mode, select options using the left selection key.
2. The options menu will then appear. By using the up/down arrow keys you can scroll
through each option. To open one of these options, click the left selection key to open it.
Photos – Shows all your photos you have taken
Camera Settings – Click the left selection key to select ok to open the camera settings.
LED Highlight – By clicking the left and right arrow keys you can turn the LED highlight
on or off
Anti-flicker – By clicking the left and right arrow keys you can change it to 60hz or 50hz
Contrast – By clicking the left and right arrow keys you can change the Contrast to high,
medium or low
Delay timer – By clicking the left and right arrow keys you can change the delay timer to
off, 5 seconds, 10 seconds or 15 seconds
Image Settings – Using the left selection key, click ok to open the image settings
Image Size – By clicking the left and right arrow keys you can change the image size to
240x320, 320x240, 640x480, 1600x1200 or 2592x1944
Image quality – By clicking the left and right arrow keys you can change the image quality
to normal, good or low
White Balance – Clicking ok using the left selection key will open the white balance menu
You can change the white balance by scrolling up or down using the up/down
arrow keys, then clicking ok using the left selection key to select which white
balance setting you want.
Scene Mode – By clicking ok using the left selection key, it will open the scene model.
To Next Page
Loading...
