Vehicle care 175
Number plate light
1. Insert screwdriver in bulb
housing, press to the side and
release spring.
2. Remove bulb housing
downwards, taking care not to pull
on the cable.
3. Lift flap and disconnect wiring
plug from bulb holder.
4. Rotate bulb holder anti-clockwise
to disengage.
5. Remove bulb from holder and
renew bulb.
6. Insert bulb holder in bulb housing
and rotate clockwise.
7. Connect wiring plug to bulb
holder.
8. Insert and engage bulb housing.
Interior lights
Courtesy light, reading lights
Have bulbs replaced by a workshop.
To Next Page
Loading...
