Introduction 145
3. Once you have changed settings,
press one of the function buttons
FM/AM or CD/MP3 to display the
relevant function.
On Volume
1. Press the SETTINGS button until
On Volume is shown on the
display.
2. Adjust the value with m or n.
After a few seconds the
respective audio source appears
on the display.
3. Once you have changed settings,
press one of the function buttons
FM/AM or CD/MP3 to display the
relevant function.
The maximum switch on volume
selected is used only if the volume
prior to switching off was higher than
the maximum switch on volume and
the Infotainment system has been off
for at least five minutes with the
ignition off.
Ext. In Vol.
Use this function to set a minimum
volume of external audio sources
such as a mobile phone.
1. Press the SETTINGS button until
Ext. In Vol. is shown on the
display.
2. Adjust the value with m or n.
After a few seconds the
respective audio source appears
on the display.
3. Once you have changed settings,
press one of the function buttons
FM/AM or CD/MP3 to display the
relevant function.
To Next Page
Loading...
