Opel COMBO-D - Page 128

126 Vehicle care
5. Attach connector to bulb.
6. Engage wire clip.
7. Install protective cover.
High beam
1. Remove protective cover.
2. Detach connector from bulb.
3. Disengage wire clip and remove
bulb from reflector.
4. Insert new bulb in reflector so that
the bulb aligns with the reflector
recess.
5. Engage wire clip, plug connector
onto bulb.
6. Install protective cover.
Side light
1. Remove protective cover.
Withdraw sidelight bulb holder
from reflector by turning
anticlockwise.
2. Remove bulb from socket, insert
new bulb.
3. Insert bulb holder in reflector.
4. Rotate clockwise to engage.
5. Install protective cover.
Daytime running light
1. Remove protective cover.
2. Withdraw sidelight bulb holder
from reflector by turning
anticlockwise.
3. Remove bulb from socket, insert
new bulb.
4. Insert bulb holder in reflector.
5. Rotate clockwise to engage.
6. Install protective cover.
Front turn signal light
1. Remove protective cover.