36 Seats, restraints
■ Pull the release lever and fold down
the backrest onto the seat cushion.
Pull the lower strap and fold the
seat assembly forwards.
■ Secure the folded seat in the
upright position by attaching the
flexible cord located on the seat
frame, to the rear seat head
restraint.
■ To lower the seat, remove the
flexible cord and lower the seat
assembly to the floor, ensuring the
rear support is located on the
anchor point and securely latched.
■ Raise the backrest and adjust the
head restraint.
■ The backrest is properly engaged
when red mark on the release lever
is no longer visible.
Removing the seats
■ Remove the seat head restraint
3 32 and remove load
compartment cover if necessary
3 51.
■ With the seat folded in the upright
position, push the release lever and
remove the seat assembly.
■ Store the head restraint on the rear
of the seat frame.
To Next Page
Loading...
